-
Hello.
Your UsbBoot-Installer won't run even if I'm administrator. Please give a look at the image below :
![Screenshot_1](https://github.com/muink/UsbBoot-Installer/assets/755339/598cf7c9-1b2f-…
-
https://dietpi.com/forum/t/tutorial-odroid-c4-rootfs-on-usb-drive/15662/31
Needs to be done per-device, of course, but all mainline U-Boot builds we use should support this.
-
### Describe the bug
This is my carrier board: https://www.makerfabs.com/raspberry-pi-cm4-tv-stick.html
This is the OS that seems to have broken it: https://www.home-assistant.io/
_I've submitted a…
-
I used balenaEtcher to burn Ubuntu Server ARM64 image file (installed from Canonical official site) to my SanDisk USB-A stick on macOS 15.0 Beta, and connected to my ARM Mac device (MacBook Pro 13-inc…
-
As of now , I was manually making boot.img, signing it using usbboot(https://github.com/raspberrypi/usbboot) tool for my custom yocto based image.
I would like to incorporate above step in yocto to…
-
Hey!
It seems the USB image is not built when the giso is for the NCS platform. We have to use https://github.com/venkateswarannagarajan/usbboot. Would it be possible to integrate it in gisobuild i…
-
uhubctl is used to toggle the power of a usb port connected to the fin (or any usbboot balena device) - this assumes the usb port is uhubctl compatible - should be specified somewhere
-
Should camera-ctl save to the boot or root directory?
-
Thought I try my luck asking here. Seems like the only place where newer ingenic boards are discussed at all.
I've been playing with with the X2000E SoC from the creality K1 printer, got uboot/spl …
-
Flashing a Fin image with Etcher works, but not with balena CLI.
The reason is that Etcher executes a code sequence (when a Fin device is detected) that switches the compute module into a mass stor…