-
Under certain circumstances (which I still haven't identified) the ultility meters `sensor.economy_nri_pv` and `sensor.economy_nri_battery` introduce a significant "jump" in value. This also includes …
-
### The problem
When you create a new Utility Meter it ALWAYS has the device class missing. There is no easy way to add this post event. Although people have supplied links to customizing the Helpe…
-
### Problem Description
Is it possible to retrieve the energy data (kWh usage) from the API?
### Solution Description
I would love to be able to create an utility meter on the total energy (kWh) us…
-
### The problem
I have multiple utility meters created, all set up to daily cycle. Today some of the meters (not all of them) restarted to zero at midnight as they were supposed to but 10 minutes lat…
-
There is some success as written in [that](https://www.reddit.com/r/RTLSDR/comments/k9dmz9/master_meter_water_utility_meter/) tread.
I had no luck: Using rtl_433 -f 916.0M -s 2400000 -g 280 -a 4 -X "…
-
hello and thank you very much for your integration and the work involved :)
unfortunately i have a problem with "usageCounterQuantity"
I have created helpers for daily, weekly, monthly and annua…
-
### The problem
I have configured Utility Meters using the 'built-in' cost sensors from the energy dashboard.
For example, input sensor:
```
state_class: total
unit_of_measurement: EUR
device_…
-
### The problem
I have a utility meter that I configured to reset monthly.
27 minutes ago of this writing (2024-03-31 23:27 CEST), it reset:
The timezone configured in my HA is set to "(G…
-
Throughout the app make sure we are using the words "Utility" vs "Meter" correctly
-
I don't know if this project takes pull requests, but I've written myself some simple utility functions that could be handy for others too:
```el
(defun jr/sclang-nodetree ()
"Open scsynth node…