-
Under certain circumstances (which I still haven't identified) the ultility meters `sensor.economy_nri_pv` and `sensor.economy_nri_battery` introduce a significant "jump" in value. This also includes …
-
Hey so my smart meter from my power company ComEd doesnt show up in the utility meter section I found this page which talks about the freq used maybe it can be added?
https://www.comed.com/SiteColl…
-
**Describe the problem you have/What new integration you would like**
I have a energy meter installed in my house that exposes its data via M-Bus. I would like to see support for reading values o…
poear updated
1 month ago
-
### The problem
I have multiple utility meters created, all set up to daily cycle. Today some of the meters (not all of them) restarted to zero at midnight as they were supposed to but 10 minutes lat…
-
Hi @gndean
Regarding "Hypervolt Session Energy Total Increasing" it tracks as Unknown before and after sessions, is it possible that rather than unknown it could default to 0?
Thanks,
Matt
-
**Describe the problem you have/What new integration you would like**
Like to get water flow metering from smart water meters with IR eye via hardware similar to [Home Assistant Glow](https:/…
-
### The problem
I am getting the following warning about some of my UtilityMeter-Helpers and don't see, where I could change the state class...
```
Logger: homeassistant.components.sensor
Source…
-
The outputs “electricity to grid” and “electricity from grid” are just “gen when negative” and “gen when positive.” It seems like with buy all / sell all, both of these numbers could be positive at th…
-
### The problem
I have configured Utility Meters using the 'built-in' cost sensors from the energy dashboard.
For example, input sensor:
```
state_class: total
unit_of_measurement: EUR
device_…
-
----------------------------------------------------------------------------------------------------
| Required Info | …