-
I have an NTSC VIC20, unmodified, with the VIC20digitizer installed, connected to an RGB2HDMI purchased at the same time. The HDMI side of things is working perfectly; however, the output from the VIC…
-
From a msg that I received:
Another thing, would you consider adding support for VIC 20? Things to adjust:
- Different palette: No grays. 0-7 same as C64, 8: orange, 9: light orange, 10-15 are bri…
-
I'd like prog8 to better support other 6502 machines as well. But I know very little of the others, and any help here would be very much appreciated
Here is a guide to help fill out the blanks requ…
irmen updated
1 month ago
-
For some reason EightBallVM is not working on VIC20. Seems to be memory corruption.
-
`tetris.8b` uses Apple II lo-res graphics and other Apple II specific low-level hardware access.
Should do a port to C64 and VIC20 also!
-
No flash screen and VIC20 logo in C64 logo place.
Colors theme is C64 but vic20 logo and Boot Mode carousel and classic images are also VIC20.
im using pal C64 mode in The C64 Maxi. Newest build p…
-
in `_vic20_tick()` I forced
```C
via1_pins |= M6522_PA6;
```
just before the `m6522_tick()`.
Thas should set to 1 the cassette `SENSE` pin, but it doesn't seem to work. After I type `LOAD`…
-
How can I create a cartridge image for the C16?
Even if I knew the structure of a C16/Vic20 crt (which so far I don't), I would have to create a specific .cfg file but that would not be enough I gu…
-
Below, the size of a compiled ugBASIC program that does nothing (empty listing).
Now, some of the files might be big because of the media format they use (e.g. the CPC one might be an empty disk), …
-
The 3.8 update 651b05e does not autorun VIC20 BASIC/ML PRG files _unless_ after startup you press the retro hotkey for RESET with the option for Reset Type = Autostart. Attached cartridges that autost…