-
Tested:
- Odroid N2+
- Nanipi R6S
- Rock5b (tested by @nyok92)
- Khadas VIM1S
From: https://github.com/armbian/distribution/releases
-
### What happened?
I regularly get this type of message with my adapter: "Adapter disconnected, stopping".
In this case, Z2M restarts.
(Continuation of the conversation started here: https://gith…
-
I'm curious if the existing tutorials are suitable for the S905X4, S905W2 and S905Y2 processors. Additionally, I would like to know if it is possible to use the following DTBs to run an Armbian image:…
-
Khadas VIM1S, Home Assistant very latest version.
Zigbee2MQTT 1.33.1
**I received today our Lixee brand new from Lixee, installed, etc.**
No option changed (like Reports, Parameters or specific…
-
### Describe the issue you are experiencing
I can't configure the OTBR integration with Silicon Labs Multiprotocol (SLM) 2.4.2:
![image](https://github.com/home-assistant/addons/assets/113300765/a6e…
-
Dear groupgets,
for a longer period of time, we don't get the module to work constantly over a longer period of time. Might there be a thermal or buffer issue with your module?
_Our setup:_
- [PT…
-
### What happened?
All systemd units are forcefully enabled on first boot, including those that does not enabled by default on package install (rsync and iperf3 services, for example) or even those t…
-
Bonjour,
j'ai installé HA sur un Khadas VIM1S, fonctionne parfaitement.
J'ai maintenant installé lovelace-meteofrance-weather-card qui fonctionne correctement à un détail près : les icônes n'appa…
-
![DSC00545](https://user-images.githubusercontent.com/481677/214755158-117cb1a8-0265-425a-a6ec-b5fb2348e607.jpeg)
## Basic information
- Board URL (official): https://www.starfivetech.com/en/s…
-
### What happened?
Build failed in github actions, error reported: “rsync: [sender] change_dir "/home/runner/work/build/build/custom/userpatches" failed: No such file or directory (2)”
2024-03-02T…