-
I recently picked up a Voxelab Aries, Used 2nd hand I have it printing pretty well I set up cura for it, but would prefer a profile for prusa slicer, but it is printing better since I can use cura. M…
-
### Description
Hello, Voxelab released Aries almost an year ago.
It's based on the PN32 AFAIK.
I have one, it's easily enclosable and the frame is quite good.
https://3dprintbeginner.com/voxe…
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
1) Flash new firmware Version: 2.1.3f-8-1 (on the previous Version: 2.1.3f-7 all OK)
2) Start pri…
-
### Cura Version
5.7.1
### Operating System
Win 11 Pro
### Printer
Voxelab Aquila (Custom Ender 3)
### Name abnormal settings
-
### Describe model location
center of build plate
### Describe…
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
After pressing the "Turn off LCD" button the screen turns off successfully. However, to get the scr…
-
### Description
### Steps to Reproduce
1. [First Step]
2. [Second Step]
3. [and so on...]
**Expected behavior:** [nothing, there is no install processing bar or anything just st…
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
Updated to MAY 2024 Rev.2 build. (Aquila_GD32_MM-ProUI-EX-05-23.bin)
I set the X maximum to 199.…
-
Original Printer: Aquila S2
Chip: HC32FA60
Firmware: Alex's - BLTouch-4x4-HS-H32.bin
Probe: Antclab's BLtouch SMART V3.1
Hot end (not sure it matters): Haldis 3D Red Lizard Q1 V6
After installing…
-
### Cura Version
5.4.0
### Operating System
Windows 11
### Printer
MakerBot Replicator
### Name abnormal settings
default settings for printer
### Describe model location
_No response_
### D…
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
When probing bed with Micro Probe v2 the probe is not detecting bed leading to bed collision. Prob…