-
Hallo Ed,
[hope you don't consider this out of topic]
My Wemos D1 runs an air traffic control radio that is heavily based on your Esp-radio. For the most part, I just left out what I didn't need a…
-
Dear Sirs,
I tried but unsuccessfully to work the HELTEC WiFi Kit 32 dev board with the ESP32-Radio.
For your info, the attached pdf shows all the pins of this dev board, also the occupied pins reg…
-
Hi, I created a CircuitPython module for interfacing with the VS1053 chip (probably also works on VS1063). It allows you to play audio files through the SPI interface:
https://github.com/urish/vs10…
urish updated
2 years ago
-
Hi,
I used the schematics from https://github.com/Edzelf/ESP32-Radio/issues/66 and also used the transistors.
I still have some "white noise" left, which might come from the ESP itself. https://…
-
Before upgrading to 2.2 Rev 0, the stations that have a bitrate of 128k mp3 sounded good. Now they are heard "as in chunks" they are not heard continuously and smoothly as it worked in the previous ve…
-
Hello,
Your project seems pretty cool !
It would be very interesting if you could write a ReadMe to make it run.
At the moment, this is supposed to run on an ESP32 module with only a sound card, …
-
Hi!
The output debug info show the VS1053 detect =0, but should be 4 right? I have tried two VS1053 boards, all the same, my esp8266 board is wemos D1. Please help. thanks!
=> extraram state: 0 …
-
I was reading through the PDF and it mentions using a "VS1063 module". Was that supposed to be VS1053 module?
-
I try to use a different VS1063b board (Sparkfun breakout board) without success: no sound. The board works, I tried it with Arduino.
For debugging I wanted to play a local mp3 file stored in SPIFFS.…