-
would u be able to use a pwnagotchi with a Waveshare eInk 2.13" v4?
-
Is badgy supported by esphome? Does anyone have config files if so?
@chunkysteveo you tagged a post with `esphome` [here](https://www.instagram.com/p/CgJeIZorzWx/)
The waveshare eink displays se…
-
### The problem
esp32:
board: esp32dev
framework:
type: arduino
pi:
clk_pin: 13
mosi_pin: 14
display:
- platform: waveshare_epaper
id: eink
cs_pin: 15
dc_pin:…
-
Could not run / compile
what did I wrong ?
here is what I did:
$ git clone https://github.com/boustrophedon/eink-esp-weather-display/
$ cd eink-esp-weather-display/esp
$ . ~/export-esp.sh
…
ds2k5 updated
10 months ago
-
**Is your feature request related to a problem? Please describe.**
Yes, The current driver for the Waveshare 2.7inch do not work with V2 hardware
**Describe the solution you'd like**
The vendor …
-
Hi Greg,
I'm trying to get your code to work with a Waveshare 7.8 inch e-paper, https://www.waveshare.com/wiki/7.8inch_e-Paper_HAT, which has 1872 x 1404 resolution. I run the code on a Raspberry P…
-
**Describe the bug**
RPI is booting up, display doesn't refresh, while going through the logs it says "Initializing waveshare v2 display" and that's it.
As of yesterday everything was working fine, …
-
I partially solved the issue by scaling all the images that the config-{h,v}.toml call, but i'm stuck on scaling the actual faces. if you can give me a hint on how to do that I might open a pr fixing …
-
As a previous pull request was taking too much time, combined with development of this display, this is pulled separate to be done when possible (a work in progress, already)
-
**Actual Behavior:**
Currently the LightningATM works only with one screen - PaPiRus Zero - ePaper / eInk Screen (display.py). It is hard to procure and expensive.
**Expected Behavior:**
The ATM…