-
### Platform
ESP32
### Assembly
I did the assembly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection picture
- …
-
Hi guys, first of all, thank you very much for your amazing work!
I am happy to announce that the weAct 2.13 E-Paper display works successfully with the EPD2in13v4 driver from @mcarr823's fork.
…
-
> Mac OS X Mojave 10.14.3
# RaspberryPI2에 LCD Driver 설치하기(deb to rpm)
- Debian 기반의 Driver 설치 스크립트를 Redhat 기반에 맞게 변경
## [1] Install Package
- xserver-xorg-input-evdev(deb) → xorg-x11-drv-evdev, x…
-
Product information checked in display:
hardware ver. E2.3
software ver. 2.0T-V2
When I try to flash osf to display, it updates and at about 20-30% drops. I don't know what might be the case. I u…
-
I bought a Bananapi M2 Berry. My target is to exchange my Rpi with the Banana one. I´m using the waveshare RS485 CAN HAT to communicate with my Voron printer CAN hotend. With Rpi and CAN HAT all works…
-
**Is your feature request related to a problem? Please describe.**
Please support the [Waveshare WM8960 Audio HAT](https://www.waveshare.com/wm8960-audio-hat.htm) as an audio output device. It is i…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Has…
-
Hi, i have a problem with this RP2040 adapter on my Xbox 1.4 soldered only pin header in according on this schematic https://raw.githubusercontent.com/Team-Resurgent/Modxo/refs/heads/main/images/lpc_h…
-
I can get through to step 7. The volume mounts but when I try to write the image, I got a USB error. I've tried both Raspberry Pi Imager and Balena Etcher.
I have the jumpers 3 RPIBOOT and 4 USBOTG…
-
jetcard (OS) state seems odd.
I put jetcard_v0p0p0.zip onto the sd card and attached it to the jetson nano.
when i burn jetcard to SD card, there is a problem that booting is not possible.
On…