-
Not familiar with the ESP devices, so please bear with me. Trying to program the files from the release-folder in my WeMos D1 4MB Board using ESP Tool online, but not succeeding.
Is the release suita…
-
Hi Joba,
nach langen Tüftelön mit VS Code und Platform IO habe ich Dein Skript sauber kompilieren können. Nun scheitert es bei mir an der Stelle des Uploads. Ich habe Dir dazu einmal ein Foto angef…
-
Can someone help with communication and adjusting the program to the Wemos D1 Mini? Below is my configuration, in the logs I have "inventer not found" error.
serial = &hardwareSerial;
// OK pe…
-
Всем привет! Столкнулся с проблемой уже в 3х проекта (wemos d1 mini), использующих библиотеку GyverNTP (схема как в примере к библиотеке: инициируем, в лупе тикаем и при изменении секунд вывожу на лед…
-
Hi, i have follow guide on [https://github.com/SequoiaSan/FlipperZero-Wifi-ESP8266-Deauther-Module](https://github.com/UberGuidoZ/Flipper/tree/main/GPIO#esp8266) and create a board with Wemos. Unfortu…
vin86 updated
3 months ago
-
Hi, first I would say thank you for your job.
I'm facing a problem using this code with my Wemos D1 Mini, first using arduino IOT cloud I'm not able to connect my devices on the services and also.
…
-
### The problem
The Sensors values always unknown.
For the hardware I follow this one
### Which version of ESPHome has the issue?
2023.3.1
### What type of installation are you usin…
-
I've got a little problem with Wemos D1
The machine can no longer be operated via the display.
If it is off, I can switch it on via the display, but nothing else. I can actually control everythin…
-
When the adapter is connected with the Wemos D1 Mini, it will not boot because pin D8 is pulled high through R8 and LED3.
As described in the Pinout below -> Best Pins to use - ESP8266:
https://r…
-
Hi,
I tried your app as repeater with a Wemos mini D1.
Flashing works fine, but after flash is finished and reset of the chip no SSID "MyApp" is found.
Is this a known issue?