-
Please add support for ESP32 based VTX described here: https://github.com/RomanLut/hx-esp32-cam-fpv
It has no security keys and uses JPEG compression. Otherwise looks similar to wfb-ng.
Why: it's …
-
I deployed wfb-ng on tspi(RK3566) with kernel version 5.10.198. Enter wfb-cli gs and the following information is displayed:
![210e3d29076c87f1be9356237bc82ee2](https://github.com/svpcom/wfb-ng/asset…
-
Seems very arbitrary, for my application I want to show the radio stats and was wondering why system 3 (wfb-ng mavlink stream stats) wasnt being detected until I found an if statement that seems to ju…
-
hi,
I use wifibroadcast with RTL88xx, but I find only work in 11n.( Enable CONFIG_80211AC_VHT)
If RTL88xx support 11ac or only can use 11n to broadcast?
Thanks!
yuace updated
3 months ago
-
Currently when you wrap a Capture in async stream you can use it read-only. I would like to be able to use it for both reading packed async and using sendpacket async as well.
My main goal is to wr…
-
When I install this driver, it does not load it for my Asus AC68 adapter (RTL8814au).
The only driver that works is https://github.com/morrownr/8814au.git but I am not sure it's fully compatible wi…
gehee updated
8 months ago
-
Do you has plan to support RTL8812CU?
-
Hi, I've been using WFB with good success on a couple of drones I built. I modified the ground-station side to provide an access point so I can connect an Android tablet and my laptop, and a udp split…
-
Hi,
You use WFB-ng code which is licensed under GPLv3. Please change license to GPLv3
-
## Expected Behavior
air: gk7205v200 ip cam, OpenIPC, wfb-ng, majestic streamer
```
bitrate: 3072
codec: h265
rcMode: cbr
gopSize: 0.2
size: 1920x1080
fps: 30
```
Ground: NVR hi3…