-
I have installed the LEDE image on the router. I used the nexmon-arc tool to patch 5-2-0_18 firmware to be able to dump the RSSI values. I see that `/sys/kernel/debug/ieee80211/phy2/wil6210/sweep_dump…
-
Noticed that tags are not properly cleaned in stgit mode:
[RESEND, v4] ath10k: Fix sending NULL/ Qos NULL data frames for QCA99X0 and later
https://patchwork.kernel.org/patch/9239481/
kvalo updated
7 years ago
-
- [x] Create manifest (the one shipped with halium-7.1)
- [ ] Boot image and system image build successfully
- [ ] Device boots into rootfs, `usb: Manufacturer: GNU/Linux Device` appears in `dmesg` …
-
I have been using the sweep dump file (found under /sys/kernel/debug/ieee80211/phy2/wil6210/sweep_dump) in order to access RSSI and SNR values for each sector. The RSSI values seem to be quite odd sin…
-
the current beam SNR collection is around 3 sample per second with the AP-Client range 0 to 8 meter, it is true the rate could be as high as 10 sample, but most of the time it is not sufficient, es…
-
Hello, please help to answer two questions about perf related, thank you
1. Which grafana dashboard id is used by perf export?
2. How to display perf hardware events, such as cache-misses events
…
-
Here's my stack:
Information about my OS:
```
OS: Arch Linux
Kernel: x86_64 Linux 4.11.9-1-ARCH
CPU: Intel Core i5-2520M @ 4x 3.2GHz [25.0°C]
GPU: intel
RAM: 2286MiB / 7867MiB
```
Some DE…
-
The following rule does not match any more when using using coccinelle from ubuntu 24.04. It worked fine with Ubuntu 22.04.
````
@act@
identifier activate_fn, p;
identifier m =~ "rx_led|tx_led|ass…
hauke updated
4 months ago
-
Hi @zachariasmaladroit this what I get when I try to build pie_I_7_WIP3 branch, can you help me please?
``dragon@dragon-GS63VR-6RF:/workstation/work1/h930$ export CROSS_COMPILE=/home/dragon/workstat…
-
Sun Mar 10 22:54:49 2024 kern.info kernel: [ 68.965201] usb 3-2: new high-speed USB device number 5 using xhci_hcd
Sun Mar 10 22:54:50 2024 kern.warn kernel: [ 69.316603] ------------[ cut here ]…