-
Hi,
Can we get a copy of the P21 firmware for WiNet-S? The P21 (WINET-SV200.001.00.P021, Around 11/2023) was rock solid. I mistakenly upgraded to P22 (WINET_B000.V022.P004.zip) recently. It is very…
-
Can anybody confirm that using a WiNet-S dongle /w modbus on a SH10RT-V112 inverter lacks some of the state registers:
```
| 13000 | system_state | Unknown |
…
selop updated
10 months ago
-
My SunGrow SG2.5RS-S inverter times out on 'self._send(GET_KEY)'. After (the default 60s) timeout the communication proceeds without encryption and returns valid values. When commenting out 'self._sen…
-
Using the latest version everything works perfect but every once in a while the total_dc_power is listed as over a million watts. Typically it happens on cloudy days when the sun comes out but I do no…
-
As far as I can tell, the library doesn't yet support the new "SH15-25T" hybrid inverter series (SH15T, SH20T, SH25T). Since they are also using the WiNet-S2 module, this is most likely just a trivial…
ctr49 updated
3 weeks ago
-
Thanks for this great add on!
I am able to get data coming across into my home assistant instance, however I can't seem to get any info from the power meter i.e. I have no info about grid consumpti…
-
Hello,
I waited to update the HA until the problems with the 2024.4.x version were fixed.
Yesterday I updated everything, unfortunately I'm missing some values.
All symbols in the inverter state …
-
The script seems no longer to work since I updated to the latest SW for the WiNet-S module on my SH10RT. Anyone else having problems? @damolp ?
```
async with websockets.client.connect(
…
-
**Before you create an issue, make sure to update to the current version of [modbus_sungrow.yaml](https://github.com/mkaiser/Sungrow-SHx-Inverter-Modbus-Home-Assistant/blob/main/modbus_sungrow.yaml)**…
-
Hi, apologies if this has been covered before, however, I haven't been able to find the answer searching.
My inverter is:
SG10RS with WiNet-S Dongle
I am using the Home Assistant Addon via the …