-
https://fi.google.com/cart
-
It would likely prove very useful to have some sort of wireless data collection when putting the robots against each other to test gameplay. We could add a wireless module to the Arduino's and remove …
-
The Dezibot should be informed of its initial location via a wireless connection. This should be used to determine which figure is simulated. The move is then to be transmitted via the connection.
##…
-
### Feature Details
Increase the limit of rf transfer for ender cells and ender gates in the config on powah to have high transfer rates like 20M or 100M
-
### Controller Name
Ps2 wireless controller
### Current Controller Behaviour
Controller is not successful in pairing with the console
### Controller vendor and product ID
_No response_
### Suppo…
-
Version 1.6.0.
-
I am using the EFI you provided in your GitHub repository for the Lenovo Yoga 910-13IKB but with an i5-7200U processor (the laptop model is the same). Unfortunately, I am experiencing an issue where t…
-
**Have You Read Our Docs**
Yes
**Are You Reporting A Bug**
Yes
**Environment**
- Kext Version: 2.3.0
- WiFi Card Model: AX200
- PCI Product ID:
- macOS Version: Monterey 12.7.4
*…
-
There are a few reports about Ruuvi temperature sensors:
1) After adding a Ruuvi sensor (bluetooth), a reboot is required to make it show up in the device list. (I, Matthijs, have not reproduced it…
-
Hello, will I be able to connect my existing Honeywell wireless sensors to this system? I have a mix of wired and wireless zones.