-
Hi could you show how you wired the 2 MAX3232?
I'm not sure how to connect all to the ecologic.
/Carl
-
How are you using ground?
Your instructions say " keep the green pair connected'
Inverter:
Pins 4 & 5 - CAN for Battery to Inverter coms
M5Stack:
Pins 3 & 6 - paired ground
Pins 7 & 8 …
-
Hi, finaly took time to get back into this
Do you have a basic wiring diagram ? or is it as simple as plugging tx in rx and rx in tx ? i plan to use an ESP8266 or ESP32 if needed
Thanks :)
-
I've tried to wire the buttons to the breadboard and ESP32 as guided, but the buttons seems like it doesn't respond or received my inputs
Here are a couple of photos of the wiring:
![image](http…
-
Your design is really fascinating. I want to make one myself.
In terms of wiring, I'm a little unclear how the second sensor and the switch connect to the pins of the main pcb.
Can you provide a cle…
-
Very cool project. I don't have access to a laser cutter, but I do have a table saw, and I'd love to build something like this for dust management in my workshop—and It'll be good practice for when m…
-
Hallo,
mein LED-Strip passt nicht ideal, wenn ich den Verlauf nach "bernds_wiring" installiere (ich muss die Stripes pro Spalte zweimal trennen und jeweils minimal verlängern, damit es genau passt).…
-
Modules can provide various levels of integration, where an integration is any definition that isn't of a function that it declares.
Sometimes, integrations are not desirable. Making integrations `li…
-
### Suggestion
Been loving the pack so far playing in the Harder mode. However when it comes to automating machines with covers. Connecting machines with redstone dust just isn't ideal. The EnderIO r…
-
Thank you for opening an issue on an Adafruit Arduino library repository. To
improve the speed of resolution please review the following guidelines and
common troubleshooting steps below before cre…