-
Hi,
I believe it is not ideal to indicate that the HX711 should be connected to 5V. That is totally fine with an Arduino, but probably unsafe with the RPi.
I am not sure what exactly might happen,…
-
When I do "npm install wiringpi", after a while I get this output:
/home/pi/.node-gyp/0.12.0/deps/v8/include/v8.h:3455:34: note: static v8::Localv8::FunctionTemplate v8::FunctionTemplate::New(v8::Iso…
-
Hi. I am using a Banana PI with Armbian. On this one GPIO 17,27 is not available, because it uses wiring PI.
As far as I can see, I have to enter GPIO 0 and 2 (which I understand to be 17/27). If I …
-
```
Unable to determine hardware version. I see: Hardware : BCM2835
,
- expecting BCM2708 or BCM2709. Please report this to projects@drogon.net
```
-
I tried to install wiring-pi, i used every kind of procedure, but the result is always this. Can someone help me?
npm install wiring-pi
> wiring-pi@2.2.1 install /home/pi/.node-red/node_modules/wi…
-
Hi, I'm working on my autonomous drone project. For my setup, I used some spare parts from my Tyro 99 FPV drone. Specifically, I'm using the Matek F405STD flight controller (FC) and the EFM8BB21F16G 4…
-
**Describe the bug**
Updating on a Pi 3 stops at patchage.
**To Reproduce**
Steps to reproduce the behavior:
1. Go to Update
2. Click on Update
3. Stalls at Install preficx: /usr/local
…
wyleu updated
2 weeks ago
-
A year ago, I popped up with [questions](https://github.com/morrownr/USB-WiFi/issues/296) about drivers, adapters and such. Anyway, we built a product and I thought I would mention it here sin…
-
Hi,
I have follow the install procedure illustrated here https://nodered.org/docs/hardware/raspberrypi for wiring-pi module on Raspbian Jessie.
I have also node red installed and I have tested s…
-
# Describe the issue
Consistent loss of touch input using custom setup with Pi4 and Official Raspberry Pi 7" touchscreen in Smartipi case several minutes after booting
# To Reproduce
Absolutely c…