-
**Describe the bug**
When driving a strip of WS2812B LEDs from the IMXRT1040 SOC using the `WS2812_SPI` driver the first LED is not controlled
**To Reproduce**
Setup a board based on an IMXRT s…
-
It's unclear whether this needs to be implemented since there is no use case. The datasheet requires a signal low of 50 us or more. The oscilloscope trace of the RMT output to the WS2812 chain shows …
-
Firstly thank you for your design it is fantastic!
I am however having a problem in getting the WS2812 ledstrip to light, I have wired it up to the 5v, gnd and pins a2 and a3 separate data but daisy…
-
f1mshed@raspberrypi:~ $ sudo apt install python3- rpi5-ws2812
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package rpi5-ws28…
-
Epic : #8
-
I tried adding ws2812 to the tekko32 target circuit, using version 1.99 firmware, but it didn't work
-
Good morning, I tell you that I changed the code, it compiles but does nothing else I remain attentive thanks
![rgb](https://github.com/grblHAL/Plugin_fans/assets/32020092/671bcf47-af47…
-
### The problem
using the fastled_clockless integration with the WS2812 LEDs,
When specifying colors such as
green: 100%
does not show green, it shows a light blue instead.
Stating red: 10…
-
Hi !
Can anyone provide a short sample how to use SPI on the ESP32 chip?
Have some WS2812 to drive and some performance improvements would be great.
regards Dominik
-
an implementation for standard firmata is [here](https://github.com/ajfisher/node-pixel/tree/master/firmware/build/node_pixel_firmata) based on Adafruit_NeoPixel lib.
As alternative, [FastLED](http…