-
Add support for WS2812B (in addition to WS2812)
WS2812B uses a bit different timings
Additional information regarding the communication protocol timings:
https://cpldcpu.wordpress.com/2…
-
Hello Onlaj.
I use a Raspberry pi zero 2W.
Now my raspberry pi does it work and detect my piano (CASIO PX-130) you can see the OS show massages (see in a pic)
https://ibb.co/0XZH1WN
and freezing …
-
### What happened?
I did an OTA upgrade from 14.0-b1 to 14.0-b4 on an ESP8266 attached to a string of 550 WS8212B. After this various glitter presets & a glitter playlist would intermittently show o…
-
### The problem
Issues with FastLED light component.
Rainbow effect flickering a whole lot, Scan effect is stuttering and skipping LEDs.
### Which version of ESPHome has the issue?
202…
-
Хотел бы поблагодарить автора за этот мегапроект. В 2018 году я допиливал проект Алекса для работы с Mqtt, и вывода температуры и времени на матрицу. Так она проработала у меня почти 2 года радуя люде…
-
Hello,
Is WS8215 supported (seems so from the hardware setup) ?
If so, as there is a backup data line .. do I need to connect D4 to both data and backup data lines ?
I dont see a diagram for it o…
-
I'm trying to build the FastLEDVirtualDriver examples and clockless_i2s_virtual_esp32.h is not found. I have built a 40 pin board and am not entirely sure which eaxample I should be looking at and how…
-
**What's your question?**
I run Octoprint on a Raspberry Pi 3b
I installed the plugin in Octoprint v1.4.0. I Followed the setup wizard and all worked fine.
The WS8212b strip has a separat…
-
Hi all.
Is it possible to integrate WLED with Ambient Light Aplication over serial?
Website: http://ambilight.tender-complex.ru/en/
Android App: https://play.google.com/store/apps/details?id=com.…
-
im requesting this because most of the people uses ws2818b leds or ws2811
**(and i only have ws2812b leds so Thanks)**
Alex Cruz