-
Running IC-7300 through Omni-Rig. WSJT-X Ver 2.7.1-devel 240510 all ports open. Unable to see 'Live' tracking on maps but logging prompt on completion of QSO.
Is live mapping live on released version…
-
Hello,
I tested the integration to wsjt-x and works great.
The same i tried to do with MSHV, but no luck. The settings are fine and UDP broadcast is green and working.
Can you check this out.
Than…
-
**Describe the bug**
QSO are created by WSJT-X using the API of Wavelog. The location dependent Standard-QSLMSG, which is uploaded to eQSL, is not attached to these QSO. (field is empty) If you edit …
-
Hello, I want to connect QLog v0.39.0 with Omnirig v2.1 to my Xiegu G90.
Operation System is Windows 10.
I started Omnirig before QLog, as you mentioned in another Issue.
I can change the mode …
-
Hello
With FT8CN v.091 and x6100 firmware 1.1.7_2 (sept 2023) CAT control and RX works.
Unfortunately, TX audio does not work. Reply in #69 says it is x6100 audio problem
I managed to have WSJT tr…
djbr1 updated
3 weeks ago
-
Try to install it from the update panel but it won't install
-
I get an error saying I need to start WSJT-X 2.5.3 with my 2.5.4 version of WSJT-X. Will you be updating for the newer version. The release was just a minor bug fix release.
Thanks Joe AF1E
-
Maybe I should post this issue to WSJT-X first, but I am pretty sure this is hamlib related because just one rig is not working and works fine on N1MM, and WJST-X works fine via Omnirig, and works fin…
-
one can only choose the network device on which it automatically starts the udp server for listening to wsjt.
it needs a decicion on what interface it listens: the choose could be: 127.0.0.1 which is…
-
In order to play well with others in the WSJT-X ecosystem, implement the Indy TIdMultiCast control instead of the UDPServer so we can use the multicast. If we set our IP to a multicast IP (in the 239.…
ny4i updated
7 months ago