-
I added the Eufy clean integration and logged in successfully but no device is showing up. I deleted the integration and cleaned up the config.yaml then re-installed the integration and i get the same…
-
-
Are there plans to add support for the X10 Pro Omni vac?
-
我debug的可执行文件时public文件夹下的sort_test7,在执行这个文件的时候出现了段错误。经过我debug,发现该错误出现在该文件的tea代码中MergeSort函数在if循环中第一次调用自身这个位置。我把生成的汇编代码仔仔细细的看了一遍,并把大部分过程中目标寄存器的值进行了注释标注,发现实际运行逻辑并没有问题,但是问题出现段错误的地方是第一次调用自身的ldp x29, x3…
-
I assigned volume control to T5.
If during startup i use T5 to adjust volume (I have a custom hello file, so it can be annoyingly loud sometimes) the model that shows as checked disappears. Using…
-
hi, i'm trying use this project for 1 sfp channel. And my phy-layer not get up. there is i have some quations about ip(gtwizard):
1. If i create ip, i should create only channel or common, or channel…
-
Compiling the below with `llc -verify-machineinstrs` fails during the machine verifier:
```llvm
target datalayout = "e-m:e-p:64:64-i64:64-i128:128-n32:64-S128"
target triple = "riscv64-unknown-linu…
-
I installed the patch v. 1.0.0 on a X10-II.
It shows correctly if Android is running or not, but if I click on it nothing happens.
I currently don't know yet what should I do to provide some mor…
-
When using the integration in home assistant I'm unable to use the controls.
The inputs are being populated, but I'm unable to set it.
From the home assistant logs:
Logger: anthemav.protocol
S…
-
I have a Samsung LS25BG400EUXEN (Odyssey G25) It apparently responds with it's 'Picture Mode' on feature 0x10 instead of brightness, i.e if 'Custom' mode is set, response is always 0, if 'sRGB' respo…