-
It would be nice to have this quality of footage from the a5000
-
Does anybody have experience with flowblade using the XAVC (s 4k) codec from a Sony camera?
How well does flowblade support high dynamic range formats like slog/hlg,...
Can't find any usefull inform…
-
I'm working on updatershell of pmca and I found an bug on my 5n but is good thing. Maybe is an solution for clean hdmi.
I changed the codec key (id=0x01070087) from AVCHD, value 03, to XAVC, value…
-
If it is xAVC it needs to be 10bit. Can you provide compile instructions if there's a 10bit option?
-
Problem: When using OpenMemories Tweak and recording at 60p in XAVC-S, the recording consistently fails at 3:28:33 (tested with two separate A6000 cameras). Resulting in a corrupted, unrecoverable vid…
-
As you might know these two cameras have been left out when almost every DSLM in Sony's Portfolio received the XAVC-S codec and some of them even the SLOG-2. Can you check if there is hidden setting f…
LXR85 updated
11 months ago
-
It would be excellent if you could add this to the A7 / R / S . ( + the XAVC-S and SLOG2 for Video )
Thanks a lot !
-
TimeCode is supported in the more advanced cameras, such as the A7II.
https://www.youtube.com/watch?v=Dvpo8JlM94Y
A quick browse through the A5000 f/w shows that there are multiple references to '…
-
Hello guys!
Is it possible to modify the firmaware of the Sony FDR-AX700 camcorder to increase its 4K bitrate from 100Mbit to 175 mbit?
For example the very similar camcorder the Sony PXW-Z90V u…
-
One problem-
Had to manually set IP - on automatic (DHCP) not getting IP address - (169.254...)
After setting IP manually (i.e..10.10.0.20) everything works normally.
Also had to reboot computer …