-
As you might know these two cameras have been left out when almost every DSLM in Sony's Portfolio received the XAVC-S codec and some of them even the SLOG-2. Can you check if there is hidden setting f…
LXR85 updated
11 months ago
-
If it is xAVC it needs to be 10bit. Can you provide compile instructions if there's a 10bit option?
-
It would be excellent if you could add this to the A7 / R / S . ( + the XAVC-S and SLOG2 for Video )
Thanks a lot !
-
TimeCode is supported in the more advanced cameras, such as the A7II.
https://www.youtube.com/watch?v=Dvpo8JlM94Y
A quick browse through the A5000 f/w shows that there are multiple references to '…
-
It would be nice to have this quality of footage from the a5000
-
One problem-
Had to manually set IP - on automatic (DHCP) not getting IP address - (169.254...)
After setting IP manually (i.e..10.10.0.20) everything works normally.
Also had to reboot computer …
-
Apple Feedback Assistant ID: FB13631126
---
**DESCRIBE THE BUG:**
The S-Log3/S-Gmaut3.cine LUT is underexposing the image when the codec is ProResRAW (in my case from an A7SIII).
The same video…
-
Does anybody have experience with flowblade using the XAVC (s 4k) codec from a Sony camera?
How well does flowblade support high dynamic range formats like slog/hlg,...
Can't find any usefull inform…
-
Seems like most of the metadata uses the same format, so it should be pretty straightforward to support a7s III.
1. Adding ```'ILCE-7SM3'``` to list of models on line 878 seems to work for gyro/accel…
-
**Apple Feedback Assistant ID:** FB9840048
---
When playing or skimming UHD 4k/23.98 SLog3/SGamut3.cine 8-bit 4:2:0 XAVC-L (Long GOP) MXF from a Sony FX6, there can be an intermittent brightness f…