-
Hi,
I have this error
`9/13/2020, 11:03:37 PM - warn - XiaomiMiService: Clear Cuisine does not appear to be a Xiaomi device. Got advertisement {"localName":"ClearGrass Temp & RH","serviceData":[{…
-
Some sensors are EXCLUDED from Recorder:
```
recorder:
...
exclude:
...
entities:
...
- sensor.xiaomi_cg_1
- sensor.xiaomi_cg_2
```
Consider this card for t…
-
### The problem
I have a few xiaomi ble temperature sensors (LYWSD03MMC), flashed with the latestest BTHome firmware.
The temperature/ humidity is shown as expectect, but some sensors also have ga…
-
I installed your program to a RasPi 0W because I wanted to test some new Govee H5074s. I already had 8 Xiaomi LYWD03MMCs and 8 LYWDCGQs, so when I saw the program also supported the ATC version I we…
-
- [ ] Install Vibration Sensor into Mail Box
- [ ] Install Vibration Sensor onto Bed for testing not sure what to do with this one yet.
-
I have a new set of Xiomi temp sensors. I am trying to hardware restore the original firmware since these have the new Xiaomi firmware but the prcoess an the page here is not working
https://pvvx.gi…
-
### The problem
The previous issue (https://github.com/home-assistant/core/issues/77291) became stale and was automatically closed.
In short:
1. There are "mop attached" & "water box attached" se…
-
### The problem
The "Vibration status" remain at "off" for vibration sensors.
My Aqara hub is already linked to my jeedom installation and there it's OK.
![image](https://github.com/user-attachmen…
-
Thanks to @atc1441 it's possible to flash the LYWSD03MMC sensors to remove the encryption - https://github.com/atc1441/ATC_MiThermometer
However once flashed, Room Assistant doesn't seem to be able…
-
### The problem
I am unable to load google integrations since updating to Core 2024.5.2
### What version of Home Assistant Core has the issue?
2024.5.3
### What was the last working version of Hom…