-
Auf der RGB2Rv23 haben wir einen XUM1541-Adapter (USB) benutzt um die neue Kassensoftware auf die Floppy zu kriegen mithilfe eines 1541 Laufwerks.
Dazu muss man die Software OpenCBM nutzen: https:/…
-
Dear Bjorn,
I've a problem using a pro micro compatible board (avr32u4 based), loaded with xum1541-PROMICRO-v07.hex original file (not recompiled).
The first command I type, cbmctrl detect, work…
-
Standard ZoomFloppy with current firmware connected to a 1571 as device 9. This used to work on this ppc64le system in Fedora 35, but I haven't tried it since the upgrade. VICE crashes outright. When …
-
Hi there, I'm trying to get cbmctrl working with my new ZoomFloppy and a Commodore 1520 Plotter. I can't seem to get this project to work correctly when running on my AMD64 Linux laptop. When plugged …
-
i flash the xum1541-PROMICRO-v08.hex, flash no error. not working. not see the 1541 drive.
flash the xum1541-PROMICRO-v07.hex and work fine.
-
I fully acknowledge that this might be a me problem, but appreciate any insight that could be provided.
I have a ZoomFloppy, fresh from RETRO. Machine is a Gemini Lake based machine, running Ubuntu…
-
Hello there. I have made one of these and works perfectly.
I want to add a Parallel port to my 1541 to be able to connect to this XUM1541.
Can you please provide me pinout required on the 6522 chip…
-
Hi,
I am experiencing problems using the nibtools. On every operation (reading or writing) I get this error:
> USB error in xum1541_wait_status: LIBUSB_ERROR_IO
> USB error in xum1541_ioctl cmd…
-
Hello,
First, if this is not the place to ask those questions, sorry for the noise and please advise on where to post. The opencbm mailing list seems to be for software questions only, so I do not…
ghost updated
6 years ago
-
Hi,
Before I order an Arduino pro I wonder if I can use a Arduino nano that I have laying around to build the XUM1541?
Regards, Rob