-
**Context:** I'm facing performance issues when installing some YANG modules in a not so performant device. The modules are not that big and they are taking several minutes to be installed through `sy…
-
A standard translation from YANG 2.0 to YANG 1.1 should be defined.
It will be difficult to introduce YANG 2.0 modules if a YANG 1.1 version cannot be automatically generated for existing tools to us…
-
Hello, after upgrading to the specified version:
```
libyang: 3.4.2
libnetconf2: 3.5.1
Sysrepo: 2.11.7
netopeer2: 2.2.31
```
I encountered the following issue when install…
-
I can see that example configuration provided is not aligned with yang modules inside the modules directory. eg: leaf private-key-format is not present in yang file
-
`type_defect` | by bclaise@cisco.com
___
Hi,
See https://datatracker.ietf.org/doc/draft-claise-opsawg-service-assurance-yang/
Yang Validation ☯ 0 errors, 2 warnings.
example-service-assu…
-
Thread on NETMOD is 'Query about augmenting module from submodule in YANG 1.0'.
Juergen:
In case YANG 2.0 is ever done, I suggest someone files a proposal to
remove submodules if the cost/benefit…
-
Good day,
When I try to load OSPF-MIB, OSPF-TRAP-MIB, CISCO-OSPF-MIB, CISCO-OSPF-TRAP-MIB modules, there is no response from the device. All other modules work properly except MIB modules. SNMP al…
-
### Current Behavior
The system booted with WAN connected and LAN disconnected.
```
lan ethernet DOWN b2:b2:41:23:71:82
ipv4 …
-
It would be convenient to compile a set of module- and submodule-yang-files in one bundle. E.g. by supplying both kinds to the yang.schema.Context or similar.
As part of including the submodule int…
-
https://github.com/YangModels/yang/tree/main/standard/ietf
The RFC directory has not been updated since 23 November 2023
https://github.com/YangModels/yang/commit/121ac333977486a883fd039afae75db386d…