-
I thought changing PKTCTRL0 to 0x00 would remove any length or address bytes, but a Length byte was still being added to the packets.
I had to change the first line of sendData function to fix this
…
-
When calling "sudo rfcat -r" it sometimes works fine, but usually it gives me either
"Error claimning usb interface:USBError(16, u'Resource busy')
or (more common)
Error in resetup():USBError(110…
-
Is the external power amp of the Yard Stick One actually used?
in cc1111rf.c:
```
// amplifier external to CC1111
volatile __xdata u8 rfAmpMode = 0;
```
This ifdef:
```
#ifdef YARDSTICKONE
S…
-
I am reverse engineering a sub GHz radio protocol. I have figured out the protocol, and am able to spoof the receiver transmitting from my Yardstick One with RFCat, using packets sniffed on another SD…
-
Hello everybody,
I am trying to test my 433Mhz garage remote, and i would like to study the RSSI and LQI coverage. I have a Yard Stick One configured with my signal parameters and i receive the key…
-
Can you please add a PDF version of the schematics and the PCB layout, so the interested can view them without having to download a whole CAD program?
-
# ISSUE
- I can't update my firmware as SDCC 3.5 is not to be found
# Env / OS
```
- Darwin MacBook-Pro.local 20.6.0
- Darwin Kernel Version 20.6.0:
- Mon Aug 30 06:12:20 PDT 2021;
- root:…
-
Hello,
I've been experimenting with the YardStick One and the RTL-SDR (RTL2832U & R820T2-Based Software Defined Radio)
dongle and I noticed that the YardStick One RX RF gain seems to be set too hi…
-
I think I have things setup correctly, however I'm not seeing any RFCAT ports enumerated in /dev.
After
sudo rfcat --bootloader --force
I see the 3 lights lit.
BiffRaff:lsusb graypowell$ ls -…
-
Hi
== Hardware ==
Dongle: b'YARDSTICKONE'
Firmware rev: b'0348\x00'
Compiler: Not found! Update needed!
Bootloader: CC-Bootloader
== Software ==
rflib …