-
We need explicit step-by-step instructions for assembly from scratch (using an upgrade kit from Prusa) *AND* assembly using an existing MK2 as a donor.
-
Dear Bondtech team,
thank you providing all the changes that you have implemented in Prusa firmware. I only cannot understand where I have to place the last 3 changes for MK3s firmware? I would be …
-
I flashed this firmware to my Prusa and my printer is not showing the correct temperature. Thoughts? Unless at room temperature (~23°C) the thermistor should be saying 60°C.
-
Hi,
which settings do I have to use for the parts?
At the moment I print with PETG, infill 100% and wall thickness/ top/bottom thickness 1.2mm.
What are the best options for stability and for…
-
Please report here your LA1.5 fix test results.
### UPDATE 30 Juli 2020
------------------------------------------------------------------------------------
A new LA @wavexx version to improve LA1.…
-
It appears many of the MK3S extruder printed part OpenSCAD files are missing from the repository (though STL files are present) including the extruder-body.scad, extruder-cover.scad and extruder-motor…
-
Using a TFT70 v3 linked to a Bigtreetech Octopus pro 1.0 board via EXP1 and EXP2. This is on a Zaribo ZLC printer which is a CoreXY with a frame mounted bed and the print gantry moving all directions…
-
Turkish language files.
[lang_tr.zip](https://github.com/3d-gussner/Prusa-Firmware/files/3922965/lang_tr.zip)
-
Hi,
I have a question. I use a Prusa Mk3 Mod with inverted y-Stepper. I changed the value in the firmware but it seem's that there is bug with calibration with changed values (inverted) for stepp…
-
All my fans are working and I never had an issue with them until after I updated to 3.5.2.
After the update, Soon after the print fan turns on (4th layer PETG), the print will stop with a Print Fan…