-
Hello,
I am curious how to make the 10 GbE core work on the ZCU102 and ZCU111.
The ZCU111 have these extra signals:
SFP_TX_FAULT
SFP_TX_DISABLE J
SFP_MOD_DETECT
SFP_RS0
SFP_RS1
SFP_…
-
Hi ikwzm
I'm using u-dma-buf (master branch)on a Zynq MPSoC Ultrascale+ board (ZCU111),and I use xilinx offer petalinux bsp for zcu111 with the petalinux version is 2020.2.
I compile u-dma-buf.c a…
-
I am wondering whether it will be possible to adopt Zynq MPSoC flow to implement Vitis AI on Xilinx RF SoC platforms like ZCU111 or ZCU1275. These devices also have the same ARM A53 QuadCore PS.
If i…
-
Every time the ZCU216 is rebooted the MAC address changes. My fix is to put at static ip address in the /etc/network/interfaces.d/eth0 file via
```
auto eth0
iface eth0 inet dhcp
hwaddress …
-
Hi @ZhaoqxCN
I am trying to replicate this design(mnist) in ZCU111 board. I have used allocate instead of xlnk. is there any different way to load the weights in memory or is it possible to load w…
-
Hi
we cannot install from this repo
cd ~
mkdir ~/src
git clone https://github/com/mazinlab/mkidgen3.git ~/src/
fatal: unable to access 'https://github/com/mazinlab/mkidgen3.git/': Could not resol…
-
I got involved in new project at the WUT.
We will build wideband MIMO SDR. Probably on the new RFSoC that:
- are pin compatible with ZU25
- offer 8x 10G DACs and 8x 5G ADCs
You won't find any i…
-
Hey Sara,
Thanks for your working putting this together.
Can you post or recommend .ipynb (jupyter notebooks) that work with and demo the RF data converters on the RFSoC for the ZCU216?
I t…
-
Hello,
It appears that strath_sdfec_hw will no longer build since commit 946d4b9e59671d5f1e1e56a384e74260d2e0bc25.
Looks like there has been an IP core VLNV change causing issues,
Dave.
-
The system will halt on initialisation if the system is not connected in loopback. A kernel interrupt is required to fix the issue.