-
Setup:
Linux (GENTOO, Linux kernel 6.10.2)
kitty 0.35.2
zsh 5.9
picocom 3.1
Raspberry Pie Pico W
Zeptoforth 1.7.0
Setting up the Pico W:
Using Zeptoforth 1.7.0 big full usb uf2 to flash the …
-
The pico-ice is a small, low cost board with the Raspberry Pi Pico processor (RP2040) and a Lattice Semiconductor iCE40UP5K FPGA.
https://pico-ice.tinyvision.ai/
Today my attention turned toward…
-
Having a lot of fun playing around with zeptoforth but I am stuck on this issue.
I have looked at the I2C examples in the "test" folder but it is not clear how to read or write a register on a dev…
-
I have an RP2040 Pico board running MicroPython. I am trying to install ZeptoForth.
I have followed the instructions which are basically the same as for installing MicroPython. I copy the .uf2 file…
-
https://www.raspberrypi.com/products/raspberry-pi-pico-2/
-
I'd like to attach a display and a keyboard to my rp2040 to be able to experiment with ZForth without any computer.
For this I am currently looking at a simple serial-terminal solution using a sepa…
-
Creating a constant string array. Works in Mecrisp and Gforth.
On Zepoforth zeptoforth-1.5.4.3 - zeptoforth_kernel-1.5.4.3.uf2
Not clear what the issue. is.
compat import ok
\ S" ( "ccc" -- …
-
I currently use zeptoforth built for rp2040, version 0.59.4 s a hobbyist on a Cytron MAKER PI PICO.
Seeed also has the Wio RP2040 mini Dev Board with Onboard Wifi. I have 3 of these dev boards and I …
-
Hi,
I have found your board on tindie, but because the high shipping costs, I would like to know first if it is comptible with my use-case. Could you please test your board with the latest Zeptofor…
-
```
ok
reboot
Welcome to zeptoforth
Built for rp2040, version 1.0.2, on Sat Jun 10 05:07:21 PM CDT 2023
zeptoforth comes with ABSOLUTELY NO WARRANTY: for details type `license'
ok
ok
o…