-
**Describe the problem you have/What new integration you would like**
Please add support for the Winsen ZH03B module. Or if possible in a couple of steps how to add support my self
**Please …
-
I have trouble about reading the stream by ZH03B. Could please help me?
-
It seems that Winsen are now shipping ZH06 if you try buy ZH03 devices. The spec sheet is pretty similar. Only difference I can see is that the message is 32 bytes long (with lots of reserved fields) …
-
I'm just putting this issue here for others facing the same thing to have a place to track it.
I've got a 9-in-1 device. The 5-in-1 code actually works on it, because the same 5-in-1 messages are u…
-
Hi
I am using SD_ZH03B library and the example code in my project.
I have connected PIN 1 and 2 of ZH03B to the external 5V power supply , Connected the GND of Arduino UNO to the GND of the exte…
-
the model
WINSENSOR ZH03B
https://www.chipdip.ru/product0/8001825831
-
**Have you looked for this feature in other issues and in the docs?**
Yes, found a similar sensor PMS7003 with UART interface which is supported.
**Is your feature request related to a proble…
-
With the latest code ([ZH03B Module](https://github.com/kizniche/Mycodo/blob/60136a04284392ce54496f21faaf7fd4c5f5637d/mycodo/inputs/winsen_zh03b.py)), I receive an exception. The sensor was working pr…
-
This issue was briefly discussed with @Theoi-Meteoroi. Essentially, USB devices are assigned as /dev/ttyUSB*, where * is a an integer assigned by the kernel upon detection. If there are several USB de…
-
Allow a new input to be added to Mycodo with a single file.
This issue is to track the progress of this potential feature. A new branch will be created for this, [single_file_input_modules](https:/…