-
@ksjh and @darkxst while I don't actually have any Elelabs hardware myself would still like to suggest that you guys consider looking into extending patches to this repo to include Elelabs EFR32 based…
-
### The problem
As described many times before the rfxcom integration refuses to start if you restart HA, claiming it can't connect to the USB device
### What version of Home Assistant Core has the …
-
### Link
http://www.leapmmw.com/
### Database entry
{"id":2,"type":"Router","ieeeAddr":"0xa4c1385406d5e8f6","nwkAddr":4964,"manufId":4417,"manufName":"_TZ321C_fkzihax8","powerSource":"Mains (single…
-
@manup (Manuel Pietschmann) Can I suggest that you (and @dresden-elektronik / [Phoscon](https://phoscon.de)) try to reach out to @pipiche38 (Patrick Pichon) and his fellow developers about possible co…
-
Hi,
I'm trying to make the Digi Shield work on a raspberry 3. I have tryed to connect the the shield equiped with Xbee PRO S2C Zigbee antenna with both GPIO and USB but I'm not able to read recived…
-
Would like to suggest designing your next ZigStar Gateway to have a pin-header compatible with the standard Raspberry Pi GPIO.
Similar to what fairecasoimeme did with this ZiGate-Ethernet platform …
Hedda updated
2 years ago
-
@NilsBohr (Nikita Selednikov) Silicon Labs EZSP compatibility in [zigbee-herdsman](https://github.com/Koenkk/zigbee-herdsman) as used by [Zigbee2MQTT](https://www.zigbee2mqtt.io/guide/adapters) and [I…
-
### The problem
I have the latest HomeAssistant version installed on a Raspberry pi 4B 2GB with a Raspbee2 shield for Zigbee communication and ZHA integration.
I use this to control Ikea trådfri l…
-
Hi, i tried yesteday to switch my ELR023 from the current Zigbee firmware to the OTBR Thread firmware, the procedure seems to have worked but after the initial first reboot the shield is no longer det…
-
@fairecasoimeme For the next hardware revision, please consider changing the orientation of the ESP32 module (or rather the ESP32 antenna alinement orientation) as if using a different orientation th…
Hedda updated
2 years ago