Robot moves a bit when commanding a car_frame velocity in Position control Mode

[torydebra]

Hi,

As title, I noticed this .

Steps:

• roslaunch centauro_cartesio centauro_car_model.launch
• rviz By default, mode is Position for the car_frame task:

  rosservice call /cartesian/car_frame/get_cartesian_task_properties 
  base_link: "world"
  distal_link: "car_frame"
  control_mode: "Position"
  state: "Online"
  use_local_subtasks: False
  max_vel_lin: 1.0
  max_vel_ang: 1.0
  max_acc_lin: 10.0
  max_acc_ang: 10.0

But if I send a twist command :

rostopic pub /cartesian/car_frame/velocity_reference geometry_msgs/TwistStamped "header:
  seq: 0
  stamp:
    secs: 0
    nsecs: 0
  frame_id: ''
twist:
  linear:
    x: 0.1
    y: 0.0
    z: 0.0
  angular:
    x: 0.0
    y: 0.0
    z: 0.0" -r 100

I can see the robot move a bit forward and then stop, as if he remembers only after a few moments that the car_frame is controlled in position.

When setting the velocity control mode:

rosservice call /cartesian/car_frame/set_control_mode "ctrl_mode: 'velocity'" 

The robot correctly responds to the velocity command moving forward until the command is published

Is this normal ? @alaurenzi

[alaurenzi]

Yes, the two commands are applied in parallel