search

AK-Homberger / Seatalk-Autopilot-Remote-Control

This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.
GNU General Public License v3.0
62 stars 11 forks source link

Gerber file #17

Open thomasnisole opened 6 months ago

thomasnisole commented 6 months ago

Hello @AK-Homberger , is it possible to have gerber file to make pcb on jlcpcb ?

Thank you in advance. Thomas.

AK-Homberger commented 6 months ago

Hi,I don’t have gerber files for this project.But with the project files for KiCad on GitHub, you can create that files by yourself.Regards,AndreasAm 21.02.2024 um 21:02 schrieb Thomas Nisole @.***>: Hello @AK-Homberger , is it possible to have gerber file to make pcb on jlcpcb ? Thank you in advance. Thomas.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

thomasnisole commented 6 months ago

Hello @AK-Homberger , thank you for your response. But i don't find any kicad file on the repository ?

Thank you.

AK-Homberger commented 6 months ago

You are right. For this project, I did not upload the KiCad files. I will do this later this week.Am 26.02.2024 um 12:07 schrieb Thomas Nisole @.***>: Hello @AK-Homberger , thank you for your response. But i don't find any kicad file on the repository ? Thank you.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

thomasnisole commented 6 months ago

Perfect, thank you @AK-Homberger

thomasnisole commented 5 months ago

Hello @AK-Homberger, sorry to insist but would it be possible to have the gerber files? Thanks.

AK-Homberger commented 5 months ago

I don't have any gerber files. But you can create them by yourself with KiCad.