search

AMoo-Miki / homebridge-tuya-lan

Homebridge plugin for IoT devices that use Tuya Smart's platform
MIT License
204 stars 52 forks source link

New Kogan Smart Plug (Kaspemha) can’t find ID #113

Open ErikVeland opened 4 years ago

ErikVeland commented 4 years ago

Having perused some threads here I’ve installed the latest rc (12 as of now), followed the instructions to a tee, reinstalled the certificate and yet the only message I get running tuya-lan-find and tuya-lan-find --schema is "Intercepted certificate request”.

In the Tuya Smart App I’ve succesfully added the plug, but when I run the app with the proxy enabled the app complains “Network is unavailable, please check the network” and nothing shows up in Terminal.

Had no problems installing my previous plugs from the same place. Although I used anyproxy with that, which also doesn’t seem to get any messages from the app.

ErikVeland commented 4 years ago

No help with this one? They look identical (same model) as my previous two I bought a year ago, which I had no problems getting the ID off :/

TheHomekitWayFinder commented 4 years ago

What app have you got the devices in

Sent with GitHawk

ErikVeland commented 4 years ago

I can connect it both to TuyaSmart and to the Kogan branded Tuya app “Smarter Home”.

ErikVeland commented 4 years ago

Follow the instructions on https://github.com/AMoo-Miki/homebridge-tuya-lan/wiki/Setup-Instructions Proxy IP: 10.0.0.88 Proxy Port: 8080

Error: undefined [Error: 4488428992:error:14209102:SSL routines:tls_early_post_process_client_hello:unsupported protocol:../deps/openssl/openssl/ssl/statem/statem_srvr.c:1663: ]

…but that could be from other protocols on my iPhone trying to connect? There’s nothing from refreshing the Tuya app, or force closing and reopening. I can turn the light on and off using the app whilst connected to the proxy as well.

TheHomekitWayFinder commented 4 years ago

If you open what ever app you’re using then click on the device and go into the more tab and then click device information and then you should find your device ID in ghere

Sent with GitHawk

ErikVeland commented 4 years ago

That gets me half way there. How can I use that to get the key?

ErikVeland commented 4 years ago

Could this be an SSL mismatch between Catalina 10.15.1, iOS 13.2 and tuya-lan-find somehow?

ErikVeland commented 4 years ago

Had a brainwave that my wifi autoswitches from 5Ghz to 2.4Ghz based on your device, so switched both phone and Mac to a 2.4Ghz WiFi only. Still no dice.

Getting no output from tuya-home-lan and Tuya smart app on the iPhone just complains about “Network is unavailable, please check the network” regardless of refreshing all devices, or going to Device Information. Check Device Network reports that everything is normal with the Device and its signal. And can turn it off and on as before.

ErikVeland commented 4 years ago

Back on the unproxied network:

Check for Firmware Upgrade: Wi-Fi Module 1.0.3 MCU Module 1.0.3

The virtual ID is 00343721 and then the MAC address

TheHomekitWayFinder commented 4 years ago

Have you made sure that you have granted the certificate full access as I hadn’t done that when I was getting my keys and therefore it wouldn’t work

Sent with GitHawk

TheHomekitWayFinder commented 4 years ago

One other thing is to make sure nothing is open apart from settings when you’re setting it up and then close settings before opening TuyaSmart or Kogan Smarterhome as this will minimise the amount of trash you get. Also as soon as the plugin detects the ID and key the plugin will automatically stop searching. Be patient as it can take about 15 seconds for the info to be detected once the TuyaSmart app has been opened

Sent with GitHawk

ErikVeland commented 4 years ago

Have you made sure that you have granted the certificate full access as I hadn’t done that when I was getting my keys and therefore it wouldn’t work

On the iPhone? I can go to certificates, and even into it but there’s no further access I can grant it that I can see.

TheHomekitWayFinder commented 4 years ago

It’s under General > about > certificate trust settings which is located at the bottom

Sent with GitHawk

ErikVeland commented 4 years ago

Champion!

Sent from my iPhone

On 9 Nov 2019, at 15:32, TheHomekitWayFinder notifications@github.com wrote:

 It’s under General > about > certificate trust settings which is located at the bottom

Sent with GitHawk

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

TheHomekitWayFinder commented 4 years ago

Did that work

Sent with GitHawk

ErikVeland commented 4 years ago

Sigh. Even with the trusted root certificate. Either network with manual proxy Tuya Smart app still complains about Network is unavailable, please check the network. Nothing shows up in tuya-lan-find except Error: undefined [Error: 4470922688:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:299: ]

Tried adding a new device, but still nothing.

ErikVeland commented 4 years ago

FINALLY! I had to reinstall the certificate. I probably didn’t have the latest one on my phone after installing the latest rc.

TheHomekitWayFinder commented 4 years ago

So did you get it working

Sent with GitHawk

ErikVeland commented 4 years ago

Sure did. Thanks!

Sent from my iPhone

On 10 Nov 2019, at 16:53, TheHomekitWayFinder notifications@github.com wrote:

 So did you get it workibg

Sent with GitHawk

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

tom-23 commented 4 years ago

I worked around this issue by installing AppStore++ on a jailbroken device and downgraded the app to get the id and key.

daven1985 commented 4 years ago

I am still having this issue. I have tried it on my iPhone XS with latest OS.

Tuya app just won't update and gives network error.

Interesting thought... I am running my own a VM on a Raspberry Pi.. could that be the issue.

lukemackinnon75 commented 4 years ago

I am also having a similar problem. Running tuya-lan-find on a Pi4 w/ Raspbian GNU/Linux 10 and running Tuya Smart on an iPhone 11 iOS 13.3.1 and getting :- Error: ERR_SSL_WRONG_VERSION_NUMBER [Error: 3069471184:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:../deps/openssl/openssl/ssl/record/ssl3_record.c:355: ] { library: 'SSL routines', function: 'ssl3_get_record', reason: 'wrong version number', code: 'ERR_SSL_WRONG_VERSION_NUMBER' }

Any help would be greatly appreciated.

alexpad16 commented 3 years ago

I have also similar issue. Error: ERR_SSL_UNSUPPORTED_PROTOCOL [Error: 140434724980608:error:14209102:SSL routines:tls_early_post_process_client_hello:unsupported protocol:../deps/openssl/openssl/ssl/statem/statem_srvr.c:1686: ] { library: 'SSL routines', function: 'tls_early_post_process_client_hello', reason: 'unsupported protocol', code: 'ERR_SSL_UNSUPPORTED_PROTOCOL' }

nickd-beemit commented 1 year ago

Pretty sure this is due to Tuya app now pinning ssl certs, related issue https://github.com/AMoo-Miki/homebridge-tuya-lan/issues/142