I apologize for the long commit list, but the following tools have been changed:
LoadGeometry: Now reads in .csv file containing the PMT timing offsets derived from the laser source calibration.
PhaseIIADCHitFinder: Subtracts timing offsets from hit times. New hit timing method that will take the 50% value of the maximum above threshold as the hit time, not the time tick corresponding to the maximum ADC value (which was therefore always binned to 2ns)
ClusterFinder: Fix MC charge omission + first photon effect
ClusterClassifier: Change ChargeBalance calulation from 123 active PMTs --> 121 active PMTs (new gains)
EventSelector: Fixed an issue where the tool tries to grab PMT channels that are no longer listed as "active" according to the new gains measurements.
In addition, some other changes/additions are included:
EventBuilderRaw toolchain that can be used to create processed data files with raw PMT waveforms.
PrintADCData toolchain that can be used to analyze PMT raw waveforms, as well as look at auxiliary channel information (BoosterRWM, BoosterRF stored signals)
TankPMTTimingOffsets.csv - file containing the offset values from the laser calibration.
EventSelectorConfig - Tank/MRD coincidence has to be altered due to the PMT offsets being ~10ns on average.
I apologize for the long commit list, but the following tools have been changed:
LoadGeometry
: Now reads in .csv file containing the PMT timing offsets derived from the laser source calibration.PhaseIIADCHitFinder
: Subtracts timing offsets from hit times. New hit timing method that will take the 50% value of the maximum above threshold as the hit time, not the time tick corresponding to the maximum ADC value (which was therefore always binned to 2ns)ClusterFinder
: Fix MC charge omission + first photon effectClusterClassifier
: Change ChargeBalance calulation from 123 active PMTs --> 121 active PMTs (new gains)EventSelector
: Fixed an issue where the tool tries to grab PMT channels that are no longer listed as "active" according to the new gains measurements.In addition, some other changes/additions are included:
EventBuilderRaw
toolchain that can be used to create processed data files with raw PMT waveforms.PrintADCData
toolchain that can be used to analyze PMT raw waveforms, as well as look at auxiliary channel information (BoosterRWM, BoosterRF stored signals)TankPMTTimingOffsets.csv
- file containing the offset values from the laser calibration.EventBuilder
toolchain