search

ANYCUBIC-3D / Kobra2

Other
19 stars 7 forks source link

Is this actually the latest 3.0.6 firmware version? #14

Open KristiyanHristov opened 2 weeks ago

KristiyanHristov commented 2 weeks ago

I build and flashed the current 3.0.6 firmware but there seems to be a difference with the official release.

The Auto Bed Leveling procedure of the official release (04.08.2023) includes some filament extrusion, bed offset button clicking and wiping. The open sourced version goes right to mesh generation skipping those steps.

What should I do to restore the z offset switch functionality?

marcokitt2000 commented 1 week ago

how did you build it ?

KristiyanHristov commented 1 week ago

I followed this tutorial: https://www.reddit.com/r/anycubic/comments/y2waxu/tutorial_how_to_build_anycubic_marlin_source_code/

marcokitt2000 commented 1 week ago

Oke thnxx i have this but the bin doesnt work I removed all software and will test again.

Strange auto set offset not working.

marcokitt2000 commented 1 week ago

I tested it but keil was updated to 5.37 thats caused my problem. its working now and yes autobedlevel proces is not working how it must be. mmmm i found a old txt file from my self its was same issue.

Anycubic help as out sent the good file 3.0.6

marcokitt2000 commented 1 week ago

source/Marlin/src/module/settings.cpp check foto it was dissabled if 1//(.........) i remove the 1 and // compile withou errors and i go check.

check it looks was disabled

marcokitt2000 commented 1 week ago

Damm still not working but i see bin file was the same 173kb i check the 3.0.6 firmware and is 180kb mmm i think there is a option of or disabled //

marcokitt2000 commented 18 hours ago

all so with 2.8.7 build same issue. Anycubic please release the good orginal files not these what notworking is. And all so for the screen dgus software to what we can change or add or correct things.