search

ANYCUBIC-3D / Vyper

Firmware of Anycubic 3D printer Vyper
GNU General Public License v3.0
106 stars 60 forks source link

Firmware 2.3.9: when I click on "Home All" button of the "Move Axis" page, "Home All" button flickers for the full tome that the nozzle moves back to home #6

Open sanangeles84 opened 3 years ago

sanangeles84 commented 3 years ago

As per title, on firmware 2.3.9, when I click on "Home All" button of the "Move Axis" page, "Home All" button flickers for the full tome that the nozzle moves back to home. It didn't happen with all the previous firmwares that I tried, by the way could be worthy to mention maybe that I didn't try to update the screen firmware

sergekatzmann commented 3 years ago

@sanangeles84 I have exactly the same problem. No update for screen either.

sanangeles84 commented 3 years ago

@sergekatzmann Actually I found other strange "animations" also in other situations, each time there is a long process where a button or a message stays on the screen for a while, I printed a couple of times and this looks to be mostly an aesthetical problem

sergekatzmann commented 3 years ago

I don't use the screen that much, since I am controlling the printer with octoprint. the only thing I saw regarding message that was long time on was the confirmation dialog for the automatic bed leveling that was shown for a while during the leveling process. That was not the case before. With this firmware I could print as well, but unfortunately I have alot of problems with my Vyper - mainboard fan was loud now it is not working anymore, inconsistent cooling of filament (have to tweak all the time), cracks found on z-motor mounts, so I couldn't probably tell if it is coming from firmware change or not.

sergekatzmann commented 3 years ago

Just updated the screen software the problems seem to be solved now. I will observe if it is really the case. Printing benchy with the new firmware as a test now, looking alright so far.

sanangeles84 commented 3 years ago

@sergekatzmann I never done it before, I must remove plastic shell of the screen to access its SD card slot to update its firmware, right?

sergekatzmann commented 3 years ago

You don't need to remove the shell. On the bottom side there is a card slot. Just look carefully to see what is the right side of the micro sd card to go up / down. Once you found the right position place it in the slot carefully and you will feel spring pressure on the card. Use something thin to help you to gentle push the card further into the slot till it locks.

jvonehr commented 3 years ago

Note: the "right side" means contacts facing up, and to the back as you insert it. Tricky to get it in & out - I needed a pusher tool to get it to click out. There's a YouTube video on it: https://www.youtube.com/watch?v=NNJKI80F0i8