Closed GoogleCodeExporter closed 8 years ago
I do not have a display with SSD1305 controller, so i suggest to try whether it
works or not. Ensure to use a 5V/3.3V level translation for the Uno with your
Controller.
Original comment by olikr...@gmail.com
on 4 Feb 2013 at 10:21
Original comment by olikr...@gmail.com
on 4 Feb 2013 at 10:22
Yeah, try it :) But I intend to use is in prototype design, so I need to know
it now, because I want to send PCB to the factory... nevermind, must wait till
the display arrives, try it and then make necessary arrangement :)
Original comment by radim.l...@gmail.com
on 4 Feb 2013 at 10:30
Most likely the SSD1305 will work with the SSD1306 device. Or at least with
some minor modifications to it.
Original comment by olikr...@gmail.com
on 4 Feb 2013 at 10:44
Original comment by olikr...@gmail.com
on 23 Feb 2013 at 6:36
Hi Radim, have you tried it? I also have driver code for 1305, and want to try
it on a 1306 OLED.
Original comment by sasha706...@gmail.com
on 25 Jun 2015 at 4:47
please note that any further comments will be lost.
use this issue: https://github.com/olikraus/u8glib/issues/140
Original comment by olikr...@gmail.com
on 25 Jun 2015 at 7:31
Original issue reported on code.google.com by
radim.l...@gmail.com
on 4 Feb 2013 at 10:08