Closed therealkitman closed 5 years ago
Hi therealkitman, the option 4 on the switch is intended to be used with 1V/OCT input only, and it scales whatever voltage you send to it to 1V/OCT(it cycles to cover one octave):
ReScale
Utility module to convert from one voltage range to another, available inputs are: -5v/5v, 0v/5v, 0v/10v, 1V/OCT. Available output signal options are: -5v/5v, 0v/5v, -10v/10v, 0v/10v *1V/OCT option is to convert any voltage source to 1 octave 1V/OCT range.
Ah ha! I thought option 4 was for all inputs with the 1V/Oct a special case. Ok, option 4 is exclusively for 1V/Oct input only. Thanks.
Hi, found a quirk with ReScale. With the 0V/5V input and 0V/10V output (Switch 4), the output voltage does not drop below 5V. Looks like an offset is used instead of a scaling issue? See pic.