search

AScustomWorks / AS

VCV Rack Modules
Other
114 stars 16 forks source link

BPM Clock (AS v0.5.3): RST button having strange behavior... #4

Closed DomiKamu closed 6 years ago

DomiKamu commented 6 years ago

Hi,

As indicated in title, the BMP Clock module having a strange behavior when I use its RST button: all sequencers behind (with correctly wired CLOCK and RESET) they restart at first step (it's the main goal), but then run very quickly while the RST button is hold (seqs run at correct speed when this button is released, however).

I have tested with VCV's Pulse Matrix 16, Autodafe's 16-Step Sequencer, cf's trSeq and... your step sequencer. Same behavior.

Hope mine explanations are clear.

Regards. Dominique.

DomiKamu commented 6 years ago

Added: I've used Scope (from Fundamentals), only for checking CLOCK signal from any clock output (BAR, BEAT, 8ths, 16ths).

When you're holding "RST" button, the CLOCK signal stays at +10 V (sometimes falls quickly to 0 V then rises quickly to +10 V, having vertical line on Scope) - instead of continuous 0V during reset (while RST is hold).

This behavior can be seen from BAR, BEAT and 8ths clock outputs, but not from 16ths output (the clock continues to run).

AScustomWorks commented 6 years ago

Thanks Dominique!, The reset button issue is corrected now and will appear on the next release version (0.5.4)