search

AZO234 / NP2kai

Neko Project II kai
http://domisan.sakura.ne.jp/article/np2kai/np2kai.html
MIT License
259 stars 61 forks source link

Bring back SDL1 support #78

Open meepingsnesroms opened 4 years ago

meepingsnesroms commented 4 years ago

I have been trying to get Neko Project 2 Kai running on the GKD350H and see it even has an opendingux port for the GCW0 but my device dosent have a GPU or SDL2 libs and I was told it used to have SDL1 support: https://boards.dingoonity.org/ingenic-jz4760-devices/gkd350h-missing-sdl2-librarys/

AZO234 commented 4 years ago

First of all, I'm lightly supporting back support for SDL1.2. Now link is complete.

However, there are some not work properly. Probably must be implemented carefully.

Please wait a moment.

Regards.

AZO234 commented 4 years ago

Support for SDL1 has been completed. (I do not know how to create a binary for GKD350H)

Please tell me to meet your expectations!

AZO234 commented 4 years ago

I modified for RS90? Dingux series? GKD350H? I used rs90's toolchain for making .opk file.

There are two NP2kai types. One is NP2kai(PC9801 i286 specs), other one is NP21kai(PC9821 IA-32 specs). Can you check those building/runnning?

Regard.

yksoft1 commented 4 years ago

I have an RS-90 Retro Mini with OpenDingux installed. I don't think NP21 would run on it (its CPU is only 360MHz), and it had a screen too small (240x160 GBA native resolution).

AZO234 commented 4 years ago

I think shrink screen is a bit unuseful. Because NP2 is PC98(PC) emulator, character is important. I think it need at least VGA.

yksoft1 commented 4 years ago

I currently have an RS-90, a GKD350H and a Miyoo handheld (Allwinner SoC based). If @AZO234 would like to do ports for such systems, I can help testing.

AZO234 commented 4 years ago

Thanks. I wanna get these hardware!💕 If you have any problems, please send pull request.