Closed GoogleCodeExporter closed 9 years ago
Original comment by dmel...@gmail.com
on 7 Nov 2011 at 10:58
Original comment by dmel...@gmail.com
on 16 Dec 2011 at 10:08
I fixed this by lowering the baud rate to 9600. Not the most elegant solution,
but it seems to work.
https://github.com/arduino/Arduino/commit/80a2154279a02fd69f995ef6ff9eb889363c73
ca
Original comment by dmel...@gmail.com
on 28 Dec 2011 at 11:45
I also had this issue, and I resolved it using the serial buffer fix (THANK
YOU!!) I was also able to get the baud rate fix working, which of course
required me to change the avrdude command line.
It occurred to me that all of the documentation I had found on the web (for
example http://www.arduino.cc/playground/Code/MegaISP,
http://www.ladyada.net/library/arduino/bootloader.html) indicated a baud rate
of 19200 and not everyone using this may understand how to modify the command
line. Speaking for myself, I started with Arduino and later learned to program
an AVR directly by using this sketch, and a mismatch on the command line would
have been very hard for me to figure out at first.
It's definitely better to have something that works than something that
doesn't, but consider that this change might "break" the documentation. Is
there any way to use the HardwareSerial fix instead? Maybe it could prevent a
buffer overrun somewhere else in the code.
Thank you so much for this fix!
Original comment by dch...@gmail.com
on 18 Jan 2012 at 5:56
I'd love a fix that didn't require changing the baud rate (for compatibility
but also just for speed), but increasing the size of the serial buffer affects
all sketches. This seemed like too much just for the ArduinoISP sketch.
On the other hand, if you use the ArduinoISP sketch with the "Arduino as ISP"
programmer option in the Arduino 1.0.1 IDE, the baud rates will match up.
Original comment by dmel...@gmail.com
on 30 Jan 2012 at 9:20
I've been going a bit nuts with ArduinoISP and ATTiny chips (84 and 85). I was
using the MIT Arduino writeups, plus reading a lot on the net. The first
writeup works great - but only if you use Arduino-0022. The second writeup uses
Arduino 1.0 but not if you download the tiny45-85 files first. Arduino 1.0 will
not properly use tiny45-85 and Arduino 0022 will not properly use the tiny
files for Arduino 1.0
Typical response is:
avrdude: stk500_paged_write(): (a) protocol error, expect=0x14, resp=0x64
Original comment by jimgr...@earthlink.net
on 8 Feb 2012 at 6:06
Bit of a hack but...
In the ArduinoISP sketch I #defined a ARDUINOISPMODE then in HardwareSerial.cpp
I used a #ifdef to change the buffer size.
That way the buffer should only change if I've loaded the ArduinoISP sketch.
Will get blown away any time the Arduino environment needs to be reinstalled
though.
Original comment by dhewg...@gmail.com
on 17 Feb 2012 at 6:26
Original issue reported on code.google.com by
dmel...@gmail.com
on 30 Sep 2011 at 3:32