search

AdamKGoddard / XiaomiIR_ESPHome

Custom ESPHome Firmware for the Xiaomi IR Controller
GNU General Public License v3.0
21 stars 7 forks source link

Board running hot #1

Closed AdamKGoddard closed 1 year ago

AdamKGoddard commented 4 years ago

Whilst running code, board and ESP32 are hot. Whilst in bootloader, both are cool. Suspect a GPIO used for a hard coded setting with the original needs to be configured to be in a correct state?

AdamKGoddard commented 4 years ago

Inverted sends incorrect IR codes but leaves the board cool. Seems to be a idle state issue. Tested and confirmed with just switching IR LED on GPIO26 on and off. GPIO26 default state needs to be set to high when not sending.

ekorsanov01 commented 3 years ago

After sending any IR code board starts to heat up. ((((