search

AdamOswald / hexios

0 stars 0 forks source link

Add files via upload #5

Closed AdamOswald closed 7 months ago

AdamOswald commented 7 months ago

Summary by CodeRabbit

performance-testing-bot[bot] commented 7 months ago

Unable to locate .performanceTestingBot config file

pull-request-quantifier-deprecated[bot] commented 7 months ago

This PR has 1038 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +1038 -0 Percentile : 100% Total files changed: 3 Change summary by file extension: .gradle : +749 -0 .bat : +71 -0 .txt : +218 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

senior-dev-bot[bot] commented 7 months ago

Hi there! :wave: Thanks for opening a PR. It looks like you've already reached the 5 review limit on our Basic Plan for the week. If you still want a review, feel free to upgrade your subscription in the Web App and then reopen the PR

difflens[bot] commented 7 months ago

View changes in DiffLens

coderabbitai[bot] commented 7 months ago

[!WARNING]

Rate Limit Exceeded

@AdamOswald has exceeded the limit for the number of commits or files that can be reviewed per hour. Please wait 9 minutes and 45 seconds before requesting another review.

How to resolve this issue? After the wait time has elapsed, a review can be triggered using the `@coderabbitai review` command as a PR comment. Alternatively, push new commits to this PR. We recommend that you space out your commits to avoid hitting the rate limit.
How do rate limits work? CodeRabbit enforces hourly rate limits for each developer per organization. Our paid plans have higher rate limits than the trial, open-source and free plans. In all cases, we re-allow further reviews after a brief timeout. Please see our [FAQ](https://coderabbit.ai/docs/faq) for further information.
Commits Files that changed from the base of the PR and between ca23216f5fb572342e1c92bb0e3fe75da523fd64 and e110deab9aaa86845fb524df7bf8f82f13a91064.

Walkthrough

The recent update introduces significant enhancements to a Minecraft Forge modding project, focusing on build automation and environment setup. It streamlines the process of building, managing dependencies, applying and generating patches, and distributing installer artifacts. This update ensures a smoother development process for Windows and POSIX systems by providing tailored startup scripts, thereby enhancing compatibility and efficiency across different platforms.

Changes

File Summary
build.gradle Introduces functionality related to building, managing a Minecraft Forge modding project. Includes configurations for dependencies, plugins, tasks for patching, signing jars, generating runtime patches, downloading libraries, and creating installer artifacts. Key features include setting up project structure, defining dependencies, applying patches, generating runtime patches, and creating installer artifacts for distribution.
gradlew Contains a Gradle start-up script for POSIX systems. Sets up the environment for running Gradle builds, handling Java commands, classpaths, and JVM options. Generated from a Groovy template within the Gradle project.

"In the realm of code and pixeled plots,
🐇 A rabbit hopped through digital lots.
With a script, a patch, a build anew,
Across Windows and POSIX, our project flew.
From dawn till dusk, through errors and fixes,
We crafted worlds, with magic in the mix.
🌟 For every line of code we write,
A universe of blocks takes flight."

Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media?

Share - [X](https://twitter.com/intent/tweet?text=I%20just%20used%20%40coderabbitai%20for%20my%20code%20review%2C%20and%20it%27s%20fantastic%21%20It%27s%20free%20for%20OSS%20and%20offers%20a%20free%20trial%20for%20the%20proprietary%20code.%20Check%20it%20out%3A&url=https%3A//coderabbit.ai) - [Mastodon](https://mastodon.social/share?text=I%20just%20used%20%40coderabbitai%20for%20my%20code%20review%2C%20and%20it%27s%20fantastic%21%20It%27s%20free%20for%20OSS%20and%20offers%20a%20free%20trial%20for%20the%20proprietary%20code.%20Check%20it%20out%3A%20https%3A%2F%2Fcoderabbit.ai) - [Reddit](https://www.reddit.com/submit?title=Great%20tool%20for%20code%20review%20-%20CodeRabbit&text=I%20just%20used%20CodeRabbit%20for%20my%20code%20review%2C%20and%20it%27s%20fantastic%21%20It%27s%20free%20for%20OSS%20and%20offers%20a%20free%20trial%20for%20proprietary%20code.%20Check%20it%20out%3A%20https%3A//coderabbit.ai) - [LinkedIn](https://www.linkedin.com/sharing/share-offsite/?url=https%3A%2F%2Fcoderabbit.ai&mini=true&title=Great%20tool%20for%20code%20review%20-%20CodeRabbit&summary=I%20just%20used%20CodeRabbit%20for%20my%20code%20review%2C%20and%20it%27s%20fantastic%21%20It%27s%20free%20for%20OSS%20and%20offers%20a%20free%20trial%20for%20proprietary%20code)
Tips ### Chat There are 3 ways to chat with CodeRabbit: - Review comments: Directly reply to a review comment made by CodeRabbit. Example: - `I pushed a fix in commit .` - `Generate unit-tests for this file.` - `Open a follow-up GitHub issue for this discussion.` - Files and specific lines of code (under the "Files changed" tab): Tag `@coderabbitai` in a new review comment at the desired location with your query. Examples: - `@coderabbitai generate unit tests for this file.` - `@coderabbitai modularize this function.` - PR comments: Tag `@coderabbitai` in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples: - `@coderabbitai generate interesting stats about this repository and render them as a table.` - `@coderabbitai show all the console.log statements in this repository.` - `@coderabbitai read src/utils.ts and generate unit tests.` - `@coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.` Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. ### CodeRabbit Commands (invoked as PR comments) - `@coderabbitai pause` to pause the reviews on a PR. - `@coderabbitai resume` to resume the paused reviews. - `@coderabbitai review` to trigger a review. This is useful when automatic reviews are disabled for the repository. - `@coderabbitai resolve` resolve all the CodeRabbit review comments. - `@coderabbitai help` to get help. Additionally, you can add `@coderabbitai ignore` anywhere in the PR description to prevent this PR from being reviewed. ### CodeRabbit Configration File (`.coderabbit.yaml`) - You can programmatically configure CodeRabbit by adding a `.coderabbit.yaml` file to the root of your repository. - The JSON schema for the configuration file is available [here](https://coderabbit.ai/integrations/coderabbit-overrides.v2.json). - If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: `# yaml-language-server: $schema=https://coderabbit.ai/integrations/coderabbit-overrides.v2.json` ### CodeRabbit Discord Community Join our [Discord Community](https://discord.com/invite/GsXnASn26c) to get help, request features, and share feedback.
pull-request-quantifier-deprecated[bot] commented 7 months ago

This PR has 1038 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +1038 -0 Percentile : 100% Total files changed: 3 Change summary by file extension: .gradle : +749 -0 .bat : +71 -0 gradlew : +218 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

difflens[bot] commented 7 months ago

View changes in DiffLens

guide-bot[bot] commented 7 months ago

Thanks for opening this Pull Request! We need you to:

  1. Fill out the description.

    Action: Edit description and replace <!- ... --> with actual values.

difflens[bot] commented 7 months ago

View changes in DiffLens

pull-request-quantifier-deprecated[bot] commented 7 months ago

This PR has 1038 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +1038 -0 Percentile : 100% Total files changed: 3 Change summary by file extension: .gradle : +749 -0 .bat : +71 -0 gradlew : +218 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 7 months ago

This PR has 1038 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +1038 -0 Percentile : 100% Total files changed: 3 Change summary by file extension: .gradle : +749 -0 .bat : +71 -0 gradlew : +218 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated[bot] commented 7 months ago

This PR has 1038 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

``` Label : Extra Large Size : +1038 -0 Percentile : 100% Total files changed: 3 Change summary by file extension: .gradle : +749 -0 .bat : +71 -0 gradlew : +218 -0 ``` > Change counts above are quantified counts, based on the [PullRequestQuantifier customizations](https://github.com/microsoft/PullRequestQuantifier/blob/main/docs/prquantifier-yaml.md).

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a balance between between PR complexity and PR review overhead. PRs within the optimal size (typical small, or medium sized PRs) mean: - Fast and predictable releases to production: - Optimal size changes are more likely to be reviewed faster with fewer iterations. - Similarity in low PR complexity drives similar review times. - Review quality is likely higher as complexity is lower: - Bugs are more likely to be detected. - Code inconsistencies are more likely to be detected. - Knowledge sharing is improved within the participants: - Small portions can be assimilated better. - Better engineering practices are exercised: - Solving big problems by dividing them in well contained, smaller problems. - Exercising separation of concerns within the code changes. #### What can I do to optimize my changes - Use the PullRequestQuantifier to quantify your PR accurately - Create a context profile for your repo using the [context generator](https://github.com/microsoft/PullRequestQuantifier/releases) - Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the `Excluded` section from your `prquantifier.yaml` context profile. - Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your `prquantifier.yaml` context profile. - Only use the labels that matter to you, [see context specification](./docs/prquantifier-yaml.md) to customize your `prquantifier.yaml` context profile. - Change your engineering behaviors - For PRs that fall outside of the desired spectrum, review the details and check if: - Your PR could be split in smaller, self-contained PRs instead - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR). #### How to interpret the change counts in git diff output - One line was added: `+1 -0` - One line was deleted: `+0 -1` - One line was modified: `+1 -1` (git diff doesn't know about modified, it will interpret that line like one addition plus one deletion) - Change percentiles: Change characteristics (addition, deletion, modification) of this PR in relation to all other PRs within the repository.

Was this comment helpful? :thumbsup:  :ok_hand:  :thumbsdown: (Email) Customize PullRequestQuantifier for this repository.