D600 shutter lag?

[GoogleCodeExporter]

Please describe here the exact problem with the D600 and the 'shutter lag'

Original issue reported on code.google.com by hub...@gmail.com on 17 Sep 2013 at 5:49

[GoogleCodeExporter]

I try to press shutter without lens attached and see that the mirror already up 
but the shutter still close and about 3 seconds the shutter snap to take 
picture. Exposure delay off. My previous reviews saying that D600 slow in 
taking picture compare to D7000, I believe due to this.

When I disconnect the cable... the shutter lag still there... whatever setting 
I change... it still lag until I reset the camera.

Original comment by bobta...@gmail.com on 17 Sep 2013 at 6:02

[GoogleCodeExporter]

The only way there could be a shutter lag is with the 'exposure delay' property.
The 'exposure delay' does exactly that, it raises the mirror before the capture 
for the given time (1, 2 and 3 sec are valid for d600)
Can you check on camera to it is turned off?

Original comment by hub...@gmail.com on 17 Sep 2013 at 6:13

[GoogleCodeExporter]

I have a D600, too. I have a similar problem with the 'exposure delay' property.
Initially the display in APP shows the 'exposure delay' is 3 sec, but there is 
no exposure delay.
And then I change the 'exposure delay' to be off in the APP, there would have 
about 3 sec delay. 
After I kept this setup('exposure delay' off) and turn off the APP, I found 
there is still 3 sec delay in camera.
BTW, I use SONY NEO to control D600 with WU-1b.

Original comment by p65497...@gmail.com on 28 Sep 2013 at 4:43

[GoogleCodeExporter]

Can one of you check what will the camera show if you change the exposure delay 
property in DD. For each value. 
Maybe the values are in wrong direction, but I used the ones from the 
documentation.
If the following is true
DD       Camera
Off        3
1          2
2          3
3          Off
then the documentation is wrong.

Original comment by hub...@gmail.com on 28 Sep 2013 at 5:00

[GoogleCodeExporter]

I've checked the property in DD. 
DD       Camera
Off        3
1          2
2          3
3          Off
So there would me a mistake?
I think it is good enough for my use experience. I really appreciate what you 
have done!

Cheer!

Original comment by p65497...@gmail.com on 29 Sep 2013 at 3:23

[GoogleCodeExporter]

It doesn't matter which value I choose, it always defaults to theb3 second 
delay.

Original comment by m...@spax.co on 1 Oct 2013 at 5:14

[GoogleCodeExporter]

DD only changes the exposure delay when you select a new value from the dialog, 
so I'm not sure how can it always be 3 sec. This was on D600 to?

Original comment by hub...@gmail.com on 1 Oct 2013 at 6:17

[GoogleCodeExporter]

A test version for D600 exposure delay
https://code.google.com/p/dslrdashboard/downloads/detail?name=DslrDashboard_V0.3
0.30_9.apk&can=2&q=#makechanges

Original comment by hub...@gmail.com on 1 Oct 2013 at 6:25

[GoogleCodeExporter]

Anyone tested the exposure correction with D600? Is it ok now?

Original comment by hub...@gmail.com on 2 Oct 2013 at 1:55

[GoogleCodeExporter]

yes, it's ok now!! thx for your kindness!

May I ask another problem below?
I used the bulb function and set the exposure time 35s, but EXIF show that it 
expose 35.1s . I think I just set up 35s that DD count and there is still 0.1s 
needed that DD control the DSLR to shut the shutter. 
Am I right?

Original comment by p65497...@gmail.com on 2 Oct 2013 at 4:10

[GoogleCodeExporter]

There is slight delay between sending the command and receiving the response if 
the command is executed. Probably that 0.1 is from that, I will try to fix it.

Original comment by hub...@gmail.com on 3 Oct 2013 at 9:49

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Hi!

Do you plan on pushing that fix to the current version on Google Play?

Original comment by duroi...@gmail.com on 13 Nov 2013 at 2:31