Closed isokosan closed 5 years ago
In couple of latest commits, I've added feature which will disable pageflip for modesetting which could resolve your problem.
Could you please run re-install with latest changes and report if this same problem exists?
In latest commit, I've added code which will now allow "displaylink-debian" to automatically configure your Xorg config based on your graphics card.
This feature may still be bit rough around the edges and might need some improvement. So if you have still have problems after pulling latest changes and running "re-install", please re-open this story and add output of following commands:
cat /etc/X11/xorg.conf.d/20-displaylink.conf
lspci | grep -i vga
lspci -nnk | grep -i vga -A3 | grep 'in use'|cut -d":" -f2|sed 's/ //g'
lspci -nnk | grep -i vga -A3|grep Subsystem|cut -d" " -f5
Hi Adnan,
After running your installer several times on Ubuntu 16.04 I am still unable to activate my monitor.
My laptop has an Nvidia graphics card which as far as I've read online may potentially be causing extra issues.
The error I am getting on demsg upon plugging in the usb is as below:
I highlighted usb usb4-port2: cannot disable (err = -32) as the title of this issue since that was highlighted red on the terminal but that may be misleading.
xrandr providers:
usbview:
I'd be happy to hear your comments if any. Thanks!