Setup:
Hardware: Mini PC
Ado Software Version: 5.1.5
AP: EAP 225
Switch: TP-Link TL-SG105E
Internet Speed: 200 Mbps
Setup: ADO VLAN
Number of User: 1
Issue:
I am not getting the full internet speed when i am connected to Wifi Ado however when i did the speedtest on Wifi of ISP router, Ado admin portal, and EAP directly, we are getting 200mbps. Already checked the Global rate limit and make sure 1gbps , or even increase the BW per user to 1gbps and still getting the same results. Note: I am the only user on this setup as I am doing some test before i deploy it.
Speedtest on Phone connected on AdoWifi - 30 to 50mbps only
Speedtest on Ado Admin portal - 200mbps+
Speedtest on ISP router - 200mbps+
Bypassing the Mini PC and removing the VLAN. Connect directly to WiFi of EAP-225 - 200 Mbps+
Checked the Global Bandwidth Limit - 30 to 50mbps only
Set the bandwidth per user to 1gbps - 30 to 50mbps only
Tried multiple Cat6 cables and still getting results
Will see the low internet speed whenever we are connected to Ado from Phone
Speedtest when connected to ADO wifi
Ado Admin Portal Speedtest:
Speedtest on ISP Router
Speedtest bypassing Mini PC, removing VLAN and connecting directly to WiFi of EAP 225
Checked the Use Global Limit - 30 to 50mbps only
Set the Bandwidth for user to 1 Gbps - 30 to 50mbps only
Setup: Hardware: Mini PC Ado Software Version: 5.1.5 AP: EAP 225 Switch: TP-Link TL-SG105E Internet Speed: 200 Mbps Setup: ADO VLAN Number of User: 1
Issue: I am not getting the full internet speed when i am connected to Wifi Ado however when i did the speedtest on Wifi of ISP router, Ado admin portal, and EAP directly, we are getting 200mbps. Already checked the Global rate limit and make sure 1gbps , or even increase the BW per user to 1gbps and still getting the same results. Note: I am the only user on this setup as I am doing some test before i deploy it.
Speedtest when connected to ADO wifi
Ado Admin Portal Speedtest:
Speedtest on ISP Router
Speedtest bypassing Mini PC, removing VLAN and connecting directly to WiFi of EAP 225
Checked the Use Global Limit - 30 to 50mbps only
Set the Bandwidth for user to 1 Gbps - 30 to 50mbps only
Tried both setup above and still getting 50mbps