search

AdyRock / ady.sofar

GNU General Public License v3.0
0 stars 1 forks source link

supported Solarman devices #1

Open JensDesm opened 4 months ago

JensDesm commented 4 months ago

It's not clear which devices are supported. Are all (4G/GPRS/WiFi/Ethernet) Solarman Stick loggers supported or only the ethernet version? We have the LSW-3 2.4G WiFi. Will it work?

Thanks in advance for update.

AdyRock commented 4 months ago

Wi-Fi or Ethernet are fine, provide the inverter is supported. The app requires a local connection, so the 4G/GPRS probably won't work.

Rrrr4321 commented 3 months ago

Hi Adrian, Is there a way you can show 2 decimals on Total energy?

https://community.homey.app/t/app-obsolete-sofar-solarman/70830/256

AdyRock commented 3 months ago

Thanks for the nudge as I seemed to have missed that one. I have updated that topic now with the following:

Sorry, I seemed to have missed this one. Do you mean Total energy in the Solar panel device? Or would that be Today in the Solar panel device?

Depending on the inverter model, the total generation is reported to either 1 decimal place or 0 decimal places. The capability is a standard 'meter_power' which is set to 2 decimals.

So, as far as I can see, there is no rounding that I have any control over.

FGFME commented 2 months ago

Bonjour, Je suis équipé d'une solution sofar Solar (onduleur, batterie, transmetteur wifi) J'ai installé l'App dans HOMEY Cependant aucune donnée remontée dans HOMEY Mon modèle d'onduleur est HYD-30KTL-3PH Je suis sur l'application SOFARMAN Business pour avoir les stats en temps réel mais je souhaite avoir ces infos sous HOMEY pour activer des scripts Ai je raté quelque chose ? Merci pour votre soutien A bientôt

AdyRock commented 2 months ago

Could you enable the Diagnostic Log, restart the app and then send the log.

image
FGFME commented 2 months ago

Voici le lien pour le diagnostic 052c184f-2fc5-438d-a93e-4c7cc86920de

Et les logs générés suite au redémarrage de l'appli

Checking register 1156 for grid frequency:

FGFME commented 2 months ago

l'IP indiquée dans le log correspond bien a l'onduleur

FGFME commented 2 months ago

Je pensais désinstaller et réinstaller l'application. Bonne ou mauvaise idée ?

FGFME commented 2 months ago

Je vais peut être redémarrer l'onduleur car depuis la réinstallation de l'application j'ai une erreur http dans lesnlog de l'application sofar

AdyRock commented 2 months ago

I don't think reinstalling the app will help. As far as I can see, the HYD-30KTL uses the same registers as the HYD-xxG3 and that is what is being found with the grid frequency in register 1156. I don't know why it then doesn't find anything when polling for the other data.

AdyRock commented 2 months ago

Maybe it doesn't support all the registers in that profile which is causing an error. Would you be OK to do some testing of individual registers that might take a lot of your time?

AdyRock commented 2 months ago

solis_hybrid.json If you want to, the attached file contains the registers for the G3 profile. To check it, you need to open the app settings and go to the Register Log. Then enter each register number shown in the file, one-by-one, to see if it returns data.

image

If it fails. maybe try a second time just to make sure it wasn't a different error. If it always fails, then note it as a bad register and when you have finished, send the list of bad registers. I will then crate a new profile without those register in.

FGFME commented 2 months ago

Bonjour Adrian, Je serai proche de l'onduleur a partir du 12 mai. Je vais essayer de tester chaque registre comme indiqué a partir de cette date. Je vous tiens au courant A bientôt

Le ven. 26 avr. 2024, 09:43, Adrian Rockall @.***> a écrit :

solis_hybrid.json https://github.com/AdyRock/ady.sofar/files/15126928/solis_hybrid.json If you want to, the attached file contains the registers for the G3 profile. To check it, you need to open the app settings and go to the Register Log. Then enter each register number shown in the file, one-by-one, to see if it returns data. image.png (view on web) https://github.com/AdyRock/ady.sofar/assets/38184396/868400e7-028d-4bb7-b384-b1b8b9c9ccea

If it fails. maybe try a second time just to make sure it wasn't a different error. If it always fails, then note it as a bad register and when you have finished, send the list of bad registers. I will then crate a new profile without those register in.

— Reply to this email directly, view it on GitHub https://github.com/AdyRock/ady.sofar/issues/1#issuecomment-2078816605, or unsubscribe https://github.com/notifications/unsubscribe-auth/A7QKAIIGL6M4XKCGAPKDT6LY7IASHAVCNFSM6AAAAABEJEXIK2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZYHAYTMNRQGU . You are receiving this because you commented.Message ID: <AdyRock/ady. @.***>