search

AdyRock / com.misol

GNU General Public License v3.0
0 stars 1 forks source link

Sensor Data #5

Closed greenwell72 closed 2 years ago

greenwell72 commented 2 years ago

Hi, I have an Ecowitt gateway which I am able to get the data into Homey. It however is only the gateway data and not the attaches sensors.( i have an external Ecowitt Sensor. Is there a way to get that data into Homey?

AdyRock commented 2 years ago

I guess you have tried to add the sensor devices? Could you go to More-Apps-Misol and Ecowitt-Configure App and select the Detected tab, then tap on Send. Also let me know what type of external sensors you have.

greenwell72 commented 2 years ago

Hi,

It is the Ecowitt WH32D which is registered directly with gateway. When I go to Add devices this sensor is not listed. I would have assumed the associated sensor data would be sent after I added the gateway. I am getting data but only specific to the gateway and not the external sensor.

AdyRock commented 2 years ago

Ok, I have added a new device for the temperature and humidity meter. I will publish a new test version soon.

wieling commented 2 years ago

I have an GW1100 with two temp/humidity sensors (channel 1 and on channel 2). When I add the new temp/humidity sensor, I can only add 1, but the values shown are the same as my weather station and not those of the separate sensors. Any idea on how to fix this, and how to add multiple sensors?

AdyRock commented 2 years ago

Could you send me the log from the Detected tab in More - Apps - Misol and Ecowitt so I can see how they appear in the data.

wieling commented 2 years ago

Did that. Something strange happened though. I’m quite sure that yesterday I had temp1f, humidity1 and temp2f and humidity2. Apparently yesterday I set one to channel 8, and therefore you’ll see temp8f and humidity8. I did not see the other sensor in the log anymore though. Only when I changed the channel to 3, it was In the log you’ll therefore see temp3f and humidity3. However, when I set it to 1 again it did not update. And after a reboot of the gateway, it did not detect one of the sensors anymore.

Thanks! Martijn

Op zo 24 apr. 2022 om 22:47 schreef Adrian Rockall @.***

Could you send me the log from the Detected tab in More - Apps - Misol and Ecowitt so I can see how they appear in the data.

— Reply to this email directly, view it on GitHub https://github.com/AdyRock/com.misol/issues/5#issuecomment-1107915469, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACD75M4FBPNSNMI42BLRP4DVGWXMNANCNFSM5TLZ4K3Q . You are receiving this because you commented.Message ID: <AdyRock/com. @.***>

--

Prof. dr. Martijn Wieling http://www.martijnwieling.nl @.*** +31(0)610095021

Univ. Groningen, Bijzonder hoogleraar Groningse / Nedersaksische Taal en Cultuur Global Young Academy member

AdyRock commented 2 years ago

I have published a new test version that should now cope with multiple channels of T & H sensors.

wieling commented 2 years ago

Thanks Adrian. This seems to work!

With kind regards, Martijn

Prof. dr. Martijn Wieling http://www.martijnwieling.nl @.*** +31(0)610095021

Univ. Groningen, Bijzonder hoogleraar Groningse / Nedersaksische Taal en Cultuur Global Young Academy member

On Tue, Apr 26, 2022 at 12:13 AM Adrian Rockall @.***> wrote:

I have published a new test version that should now cope with multiple channels of T & H sensors.

— Reply to this email directly, view it on GitHub https://github.com/AdyRock/com.misol/issues/5#issuecomment-1109092116, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACD75M5NGMQ5G65U5WEGX2DVG4KHNANCNFSM5TLZ4K3Q . You are receiving this because you commented.Message ID: <AdyRock/com. @.***>