October 7 - 13

[Emily-Wood]

October 7

• attach splash shield to reactor and start pump at 8.0 rpm (until correct rpm is calculated)

October 8

• Phosphorous and Bacti Training (Emily and Franny)

October 9

• COD training (Emily and Shania)
• @Emily-Wood email Gabby: test scheduling updates, ask for PHOS excel sheet, ask for COD instructions sheet, coming in Thursday to finish COD

| Meeting w/Ruth & Egidio |

• solidify testing schedule for BOD, PHOS, COD, and Bacti
• determine testing range for phosphorous tests
• clarify reactor volume for HRT calculation **

October 10

• IAWWTF
• complete urgent tasks listed below
• @Emily-Wood post wet test meter pictures to github

Urgent Tasks

• [ ] Use aguaclara code to calculate rpm needed for 8 hr HRT. Post to github for future use
• [ ] confirm rpm calculation with graduated cylinder

Future Tasks

• [ ] Replace 2nd zip tie holding splash screen with large butterfly clip
• [ ] Get a very bright light to see into the reactor
• [ ] Obtain grease pencil to mark level of sludge in the reactor
• [ ] construct apparatus to hold up bag for biogas, possibly using duct tape (suggestion from Ed)
• [ ] make sure we have all of the materials to set up 2nd reactor at IAWWTF

[fmb54]

Here are the instructions for bacti testing and for PHOS testing

[vs344]

Meeting with Ruth and Egidio Notes

https://docs.google.com/document/d/1bMPJbZfQlzD22IuX27lX0jBKcQeXgjlEmD98p_zqOTs/edit

[fmb54]

Here are the instructions for BOD testing and for COD testing